NSN 5910-00-018-2080

Paper Metallized Fixed Capacitor
DEMIL
Shelf Life
UOM
NIIN
Demil:
NO
Shelf Life:
N/A
UOM:
1 EA
NIIN:
000182080

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:

We do not share or sell your information to anyone.
Privacy | Terms

Definition Definition of approved item name (AIN): "CAPACITOR,FIXED,METALLIZED,PAPER"

A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

5910-00-018-2080 Spec. NSN part characteristics

MRC
Name
Detail
MRC:
AAQL
Body Style
W/o mtg facilities, terminals on opposite surfaces
MRC:
AARG
Reliability Indicator
Not established
MRC:
ABJT
Terminal Length
1.625 inches
MRC:
ADAQ
Body Length
0.438 inches
MRC:
ADAT
Body Width
0.171 inches
MRC:
ADAU
Body Height
0.250 inches
MRC:
AEBT
Terminal Diameter
0.020 inches
MRC:
AEBZ
Schematic Diagram Designator
No common or grounded electrode (s)
MRC:
CQBF
Insulation Resistance At Maximum Operating Temp
50.0 megohm-microfarads
MRC:
CQBQ
Capacitance Value Per Section
22000.000 picofarads single section
MRC:
CQJJ
Nonderated Operating Temp
Between -55.0 degrees celsius and 100.0 degrees celsius
MRC:
CQWM
Nonderated Continuous Voltage Rating And Type Per Section
100.0 dc single section
MRC:
CRTP
Tolerance Range Per Section
-5.00/+5.00 percent single section
MRC:
CWJK
Case Material
Plastic
MRC:
CWPK
Insulation Resistance At Reference Temp
30000.0 megohm-microfarads
MRC:
CWPM
Dissipation Factor At Reference Tempurature In Percent
1.000
MRC:
CWSG
Terminal Surface Treatment
Solder
MRC:
CWSS
Dielectric Material
Plastic polyester
MRC:
TTQY
Terminal Type And Quantity
2 uninsulated wire lead

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
10155+113
Cage Code:
10138
RNCC:
C
RNVC:
1
DAC:
9
RNAAC:
TU
Status:
A
MSDS:
SADC:
Part Number:
C108-12
Cage Code:
36378
RNCC:
C
RNVC:
1
DAC:
5
RNAAC:
TX
Status:
A
MSDS:
SADC:
A5
Part Number:
X663F22351W
Cage Code:
84411
RNCC:
C
RNVC:
1
DAC:
5
RNAAC:
TX
Status:
A
MSDS:
SADC:
A5
Part Number:
X663F22391W2
Cage Code:
84411
RNCC:
C
RNVC:
1
DAC:
6
RNAAC:
TX
Status:
A
MSDS:
SADC:
A5
Part Number:
X663F22352W
Cage Code:
84411
RNCC:
5
RNVC:
2
DAC:
1
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
X663F22391W
Cage Code:
84411
RNCC:
E
RNVC:
8
DAC:
2
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
X663F22392W
Cage Code:
84411
RNCC:
E
RNVC:
8
DAC:
3
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
479039
Cage Code:
36378
RNCC:
E
RNVC:
8
DAC:
2
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
432577
Cage Code:
36378
RNCC:
3
RNVC:
9
DAC:
1
RNAAC:
TX
Status:
A
MSDS:
SADC:
Indicates a design/source control reference item
Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
31959
FIIG:
A010B0
Concept No.:
1
App. Key:
K
Cond. Code:
1
Status:
A

Part End Users MOE: Major organizational entities

Name
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Department of the Army
MOE:
DA
Rule:
A918
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Department of the Air Force
MOE:
DF
Rule:
FXGX
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Department of the Navy
MOE:
DN
Rule:
N9BN
PICA:
GX
DSOR:
User:
BRAZIL Brazil
MOE:
YA
Rule:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE:
YB
Rule:
YB01
PICA:
YB
DSOR:
User:
CANADA Canada
MOE:
ZC
Rule:
ZC01
PICA:
ZC
DSOR:
User:
UNITED KINGDOM United Kingdom
MOE:
ZK
Rule:
ZK01
PICA:
ZK
DSOR:
User:
TURKEY Turkey
MOE:
ZW
Rule:
ZW01
PICA:
ZW
DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
P
PMIC:
A
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC) A

Item does not contain precious metal.

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
ZZ
LVL_A:
Q
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
41
PKG:
69F0
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) ZZ

Special requirements.

Method of Preservation (MOP) 41

Watervaporproof bag, sealed.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B
NAIC
End Use
SITC
USDA
HITECH
Schedule B:
8532290040
NAICS:
334416
End Use Class:
20005
SITC:
77867
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 8532290040

Fixed Capacitors, Nesoi

End Use Code 20005

Electric Apparatus

Standard Intl. Trade Class (SITC) 77867

Fixed Capacitors, N.e.s.

Freight Universal and National freight and handling information

NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
061400
NMF Description:
Condensers/parts Noi/capacitors
UFC:
34450
LTL:
77.5
LCL:
--
WCC:
72D
TCC:
Z
SHC:
9
ADC:
A
ACC:
H

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 72D

Communications/electronics, other than sigint/ew or comsec repair parts and components.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

  Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements