2 alignment holes 0.094 in. Diameter spaced 1.255 in. C to c
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Copper screws, nuts, bolts, rivets, and other fasteners not threaded
NSN 7035-00-803-3056
NSN 6150-01-542-5546
NSN 5975-01-208-4788
NSN 5975-01-659-9457
NSN 6620-01-274-8764
NSN 6110-01-305-8180
NSN 6110-00-345-8007
NSN 5930-00-073-9980
NSN 6220-01-585-3066
NSN 6620-01-498-2052
NSN 5835-00-470-4295
NSN 5915-01-590-7375