Material: polyester film 0.010 thick max. White or clear matte finish. Adhesive: 0.005 thk max pressure sensitive modified acrylic adhesive. Applied as shown to one side of the polyester film adhesive to be protected with a paper liner in accordance with mil-p-19834. Adhesive peel: must withstand a 1.0 lb min, per inch of width, pulled at an angle of 180 degrees after the part has been in place on stainless steel or aluminum, with a surface finish of 60 plus/minus 30 microinches, for a of 20 minutes. Pressure sensitive adhesive.
No other part numbers with same form, fit, and function found.
NSN 6650-01-035-9350
NSN 5920-01-521-9550
NSN 5930-01-281-0646
NSN 6620-01-192-3083
NSN 6610-01-502-8868
NSN 6130-00-280-3696
NSN 5965-01-201-1580
NSN 6150-01-649-4045
NSN 5950-01-093-6015
NSN 6135-00-062-5080
NSN 5950-01-206-4717
NSN 2925-01-068-3844
Last Updated: 07/31/2025