Material: polyester film 0.010 thick max. White or clear matte finish. Adhesive: 0.005 thk max pressure sensitive modified acrylic adhesive. Applied as shown to one side of the polyester film adhesive to be protected with a paper liner in accordance with mil-p-19834. Adhesive peel: must withstand a 1.0 lb min, per inch of width, pulled at an angle of 180 degrees after the part has been in place on stainless steel or aluminum, with a surface finish of 60 plus/minus 30 microinches, for a of 20 minutes. Pressure sensitive adhesive.
No other part numbers with same form, fit, and function found.
NSN 5935-01-351-4847
NSN 2925-00-442-0974
NSN 5996-00-176-0999
NSN 6105-01-476-8040
NSN 5910-00-270-3318
NSN 5996-01-534-4700
NSN 5950-00-914-6456
NSN 5895-01-480-7889
NSN 6220-01-262-8537
NSN 6220-01-230-0872
NSN 5915-01-608-7288
NSN 6105-01-634-0322
Last Updated: 02/16/2025