Product Features
Attenuation accuracy measured at 2.0 and 4.0 gigahertz
Product Technical Spec.
Application Design:
Transmission line
Overall Length:
5.780 inches
Center To Center Distance Between Mounting Facilities Parallel To Length:
3.800 inches
Center To Center Distance Between Mounting Facilities Parallel To Width:
3.800 inches
Overall Height:
3.000 inches
Overall Width:
5.000 inches
Shaft Diameter:
0.250 inches
Shaft Length:
0.620 inches
Operating Tempurature Range:
-10.0/+71.0 degrees celsius
Voltage Standing Wave Ratio:
1.50
Coaxial Connector Series Designation:
N
Power Rating:
5.0 watts average
Mounting Facility Screw Thread Series Designator:
Unc
Insertion Loss At Minimum Attenuation In Maximum Decibels:
6.0
Overall Attenuation Range In Decibels:
+0.0/+100.0
Attenuation Variation Method:
Continuous
Mounting Facility Type And Quantity:
4 threaded hole
Frequency Range:
Between 2.000 gigahertz and 4.000 gigahertz
Overall Attenuation Accuracy In Decibels:
-1.50/+1.50
Segment Attenuation Range In Decibels:
+0.00/+100.00
Segment Attenuation Accuracy In Decibels:
-1.50/+1.50
Mounting Thread Quantity:
32 per inch
Adjustment Device Type And Quantity:
1 shaft and 1 knob
Mounting Facility Pattern:
Four position rectangular
Mounting Facility Screw Thread Diameter:
0.164 inches
Impedance Rating In Ohms:
50.0 input-output
Test Data Document:
97942-138c225 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
2 connector, coaxial, female
Item Name:
Toggle Attenuator
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
