Description
32 thread quantity per inch, unc thread series.
Product Technical Spec.
Body Style:
Multipole-single actuator type
Bushing Length:
Between 0.220 inches and 0.280 inches
Body Length:
2.200 inches
Body Height:
2.125 inches
Center To Center Distance Between Terminals Parallel To Length:
Between 1.471 inches and 1.501 inches
Center To Center Distance Between Terminals Parallel To Width:
Between 0.735 inches and 0.751 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length:
Between 1.780 inches and 1.840 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width:
Between 0.735 inches and 0.751 inches
Fragility Factor:
Moderately rugged
Mounting Facility Type And Quantity:
6 threaded hole
Storage Type:
General purpose warehouse
Thready Qty Per Inch (tpi):
32
Maximum Continuous Load Current Rating Per Pole:
10.0 amperes ac all locations
Operating Voltage Type And Rating Per Pole In Volts:
200.0 ac all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps:
1500.0 ac all locations
Circuit Protection Type:
Overcurrent all locations
Trip Release Method:
Thermal all locations
Trip Release Characteristic:
Time delay all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent:
150.0 all locations
Main Contact Tripping Mechanism Type:
Trip free
Manual Actuator Type And Quantity:
1 push-pull
Actuator Function:
Trip-reset
Actuator Position Designation:
At pole two
Internal Trip Release Configuration:
Series trip all locations
Thread Size:
0.138 inches
Trip Delay Time In Seconds Per Rated Continuous Current:
10.000 at 200 pct all locations and 65.000 at 200 pct all locations
Inclosure Protection Type For Which Designed:
General purpose
Trip Release Ambient Tempurature Rating:
25.0 degrees celsius all locations
Frequency In Hertz:
400.0 all locations
Unpackaged Unit Weight:
0.500 pounds
Precious Material And Location:
Terminal surfaces silver
Precious Material:
Silver
Test Data Document:
81205-bacc182l10a drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator:
Unc
Terminal Type And Quantity:
6 screw
Item Name:
Thermal Magnetic Trip Breaker
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
