Product Technical Spec.
Body Style:
Multipole-single actuator type
Bushing Length:
Between 0.219 inches and 0.281 inches
Body Length:
1.840 inches
Body Width:
Between 0.730 inches and 0.770 inches
Center To Center Distance Between Terminals Parallel To Length:
Between 0.469 inches and 0.531 inches
Center To Center Distance Between Terminals Parallel To Width:
Between 0.365 inches and 0.385 inches
Fragility Factor:
Moderately rugged
Mounting Surface To Terminal End Distance:
Between 1.313 inches and 1.381 inches
Mounting Facility Type And Quantity:
1 threaded bushing w/panel seal
Storage Type:
General purpose warehouse
Thready Qty Per Inch (tpi):
32
Maximum Continuous Load Current Rating Per Pole:
5.0 amperes ac all locations
Operating Voltage Type And Rating Per Pole In Volts:
120.0 ac all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps:
2000.0 ac all locations
Circuit Protection Type:
Overcurrent all locations
Trip Release Method:
Thermal all locations
Trip Release Characteristic:
Time delay all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent:
125.0 all locations
Main Contact Tripping Mechanism Type:
Trip free
Manual Actuator Type And Quantity:
1 push-pull
Actuator Function:
Trip-reset
Actuator Position Designation:
At pole two
Internal Trip Release Configuration:
Series trip all locations
Thread Size:
0.438 inches
Trip Delay Time In Seconds Per Rated Continuous Current:
3.500 at 200 pct all locations and 20.000 at 200 pct all locations
Inclosure Protection Type For Which Designed:
General purpose
Trip Release Ambient Tempurature Rating:
25.0 degrees celsius all locations
Frequency In Hertz:
400.0 all locations
Unpackaged Unit Weight:
70.0 grams
Precious Material And Location:
Contact surfaces and terminals silver
Precious Material:
Silver
Thread Series Designator:
Unc
Terminal Type And Quantity:
6 tab w/screw
Item Name:
Motor Circuit Protector
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
