Detail Specifications
Thread Pitch Diameters:
+0.3503/+0.3537 inches
Body Style:
Multipole-single actuator type
Bushing Length:
Between 0.332 inches and 0.380 inches
Body Length:
1.562 inches
Center To Center Distance Between Terminals Parallel To Length:
0.906 inches
Center To Center Distance Between Terminals Parallel To Width:
Between 0.927 inches and 0.947 inches
Nonturn Device Location:
At 3 oclock and at 9 oclock
Nonturn Device Radius:
Between 0.581 inches and 0.701 inches
Fragility Factor:
Moderately rugged
Mounting Surface To Terminal End Distance:
1.828 inches
Arc Quenching Method:
Magnetic blowout
Mounting Facility Type And Quantity:
1 threaded bushing w/panel seal
Storage Type:
General purpose warehouse
Special Handling Feature:
Magnetic
Thready Qty Per Inch (tpi):
32
Maximum Continuous Load Current Rating Per Pole:
100.0 milliamperes dc third location
Maximum Continuous Load Current Rating Per Pole:
5.0 amperes dc first location
Maximum Continuous Load Current Rating Per Pole:
5.0 amperes dc second location
Operating Voltage Type And Rating Per Pole In Volts:
28.0 dc all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps:
500.0 dc all locations
Circuit Protection Type:
Overcurrent all locations
Trip Release Method:
Magnetic all locations
Trip Release Characteristic:
Instantaneous third location
Trip Release Characteristic:
Time delay second location
Trip Release Characteristic:
Time delay first location
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent:
115.0 all locations
Main Contact Tripping Mechanism Type:
Trip free
Manual Actuator Type And Quantity:
1 toggle
Actuator Function:
Trip-reset
Actuator Position Designation:
At pole two
Internal Trip Release Configuration:
Series trip all locations
Thread Size:
0.375 inches
Trip Delay Time In Seconds Per Rated Continuous Current:
0.055 at 200 pct second location and 0.950 at 200 pct second location
Trip Delay Time In Seconds Per Rated Continuous Current:
0.055 at 200 pct first location and 0.950 at 200 pct first location
Inclosure Protection Type For Which Designed:
Vibration resistant and shockproof and moisture resistant and salt spray proof
Thread Series Designator:
Unef
Terminal Type And Quantity:
6 wire hook
Item Name:
Line Protective Switch
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
AP112-24241-3
