Product Technical Spec.
Thread Pitch Diameters:
+0.3503/+0.3537 inches
Body Style:
Multipole-single actuator type
Bushing Length:
Between 0.332 inches and 0.380 inches
Body Length:
Between 1.531 inches and 1.562 inches
Body Width:
Between 1.250 inches and 1.281 inches
Center To Center Distance Between Terminals Parallel To Length:
Between 0.875 inches and 0.906 inches
Center To Center Distance Between Terminals Parallel To Width:
Between 0.594 inches and 0.906 inches
Mounting Surface To Terminal End Distance:
Between 1.797 inches and 1.828 inches
Mounting Facility Type And Quantity:
1 threaded bushing w/panel seal
Thready Qty Per Inch (tpi):
32
Maximum Continuous Load Current Rating Per Pole:
5.0 amperes ac all locations and 5.0 amperes dc all locations
Operating Voltage Type And Rating Per Pole In Volts:
240.0 ac all locations and 50.0 dc all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps:
300.0 ac all locations and 500.0 dc all locations
Circuit Protection Type:
Overcurrent all locations
Trip Release Method:
Magnetic all locations
Trip Release Characteristic:
Time delay all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent:
125.0 all locations
Main Contact Tripping Mechanism Type:
Trip free
Manual Actuator Type And Quantity:
1 toggle
Actuator Function:
Trip-reset
Actuator Position Designation:
Between pole one and two
Internal Trip Release Configuration:
Series trip all locations
Thread Size:
0.375 inches
Trip Delay Time In Seconds Per Rated Continuous Current:
0.500 at 200 pct all locations and 0.900 at 200 pct all locations
Frequency In Hertz:
400.0 all locations
Thread Series Designator:
Unef
Terminal Type And Quantity:
4 wire hook
Item Name:
Line Protective Switch
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
