Detail Specifications
Body Style:
Single pole type
Bushing Length:
Between 0.219 inches and 0.281 inches
Body Length:
Between 0.749 inches and 0.780 inches
Body Width:
Between 0.531 inches and 0.593 inches
Center To Center Distance Between Terminals Parallel To Length:
Between 0.562 inches and 0.624 inches
Switch Contact Arrangement:
Single pole, single throw, normally closed
Fragility Factor:
Moderately rugged
Mounting Surface To Terminal End Distance:
Between 1.494 inches and 1.525 inches
Mounting Facility Type And Quantity:
1 threaded bushing
Storage Type:
General purpose warehouse
Thready Qty Per Inch (tpi):
32
Maximum Continuous Load Current Rating Per Pole:
2.5 amperes ac single location and 2.5 amperes dc single location
Operating Voltage Type And Rating Per Pole In Volts:
115.0 ac single location and 28.0 dc single location
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps:
100.0 ac single location and 100.0 dc single location
Circuit Protection Type:
Overcurrent single location
Trip Release Method:
Thermal single location
Trip Release Characteristic:
Time delay single location
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent:
145.0 single location
Main Contact Tripping Mechanism Type:
Trip free
Manual Actuator Type And Quantity:
1 push-pull
Actuator Function:
Trip-reset
Actuator Position Designation:
At pole one
Auxiliary Switch Function And Quantity:
1 control
Internal Trip Release Configuration:
Series trip single location
Thread Size:
0.438 inches
Switch Location And Position Designation:
External at pole one
Trip Delay Time In Seconds Per Rated Continuous Current:
2.000 at 200 pct single location and 20.000 at 200 pct single location
Inclosure Protection Type For Which Designed:
Corrosion resistant and moisture resistant
Trip Release Ambient Tempurature Rating:
25.0 degrees celsius single location
Switch Terminal Type:
Tab, solder lug
Switch Current Rating And Type In Amps:
2.5 ac and 2.5 dc
Switch Voltage Rating And Type In Volts:
115.0 ac and 28.0 dc
Frequency In Hertz:
400.0 single location
Test Data Document:
81349-mil-c-5809 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator:
Un
Terminal Type And Quantity:
2 screw
Specification Data:
96906-ms26574 government specification
Item Name:
Motor Circuit Protector
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
