Product Technical Spec.
Reliability Indicator:
Not established
Center To Center Distance Between Mounting Facilities Parallel To Length:
3.940 inches 1st mounting facility single center group
Center To Center Distance Between Mounting Facilities Parallel To Width:
1.790 inches 1st mounting facility single center group
Mounting Hole Diameter:
0.147 inches 2nd group
Mounting Hole Diameter:
0.191 inches 1st group
Frequency Rating:
400.0 hertz single component
Input-output Phase Relationship:
Three phase to three phase single component
Transformer Winding Connection Type:
Delta-delta and delta-wye
Winding Shielding Method:
Internal shield grounded to inclosure single component
Body Length:
5.570 inches
Body Height:
3.980 inches
Maximum Operating Temp:
70.0 degrees celsius
End Application:
F-16 adf radar
Inclosure Type:
Fully enclosed
Mounting Facility Quantity:
3 2nd group
Mounting Facility Quantity:
4 1st group
Mounting Method:
Unthreaded hole all groupings
Winding Function And Quantity:
1 primary single component and 3 secondary single component
Center To Center Distance Between Mounting Facilities Parallel To The Base Of An Isosceles Triangle:
1.570 inches 2nd mounting facility single center group
Winding Operating Current:
245.0 milliamperes ac single component 1st secondary
Winding Operating Current:
270.0 milliamperes ac single component 3rd secondary
Winding Operating Current:
91.0 milliamperes ac single component 2nd secondary
Center To Center Distance Between Mounting Facilities Parallel To The Altitude Of An Isosceles Triangle:
0.350 inches 2nd mounting facility single center group
Winding Operating Voltage:
1.19 ac minor wet single component 2nd secondary
Winding Operating Voltage:
123.00 ac pounds per hour wet single component 3rd secondary
Winding Operating Voltage:
2.33 ac minor wet single component 1st secondary
Winding Operating Voltage:
200.00 ac pounds per hour wet single component single primary
Test Data Document:
97942-593r819 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
24 turret
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
