Shop in fs

Shop our commercial and milspec fuse-holders electrical components.

Part Number Description Availability
BK/FHN26G1

Bk/fhn26g1, bussmann, panel mount-lamp indicating military fuseholder, 30a, 250v, bayonet knob, 1 poles, max panel thickness: 3/16 inches, mil-f-19207/16, for military fuse series: f02 and f03. similar to commercial version hkp. see attached specifications for more information.

in stock
BK/HFB

Bk/hfb, cooper bussmann waterproof in-line fuse holder for 1/4'' x 1 1/4'' fuses, 32 volt, 30 amp. same as hfb. bulk pack. bulk bussmann hfb

in stock
BK/HHB

Bk/hhb, bussmann,universal in-line fuse holder for 1/4 inches x 7/8 inches, 1 inch and 11/4 inches fuses

in stock
BK/HHG

Bk/hhg, bussmann, heavy duty holder with cover for use with atc blade fuses, 3-30 a fuse size, 4 inches long, #12 awg yellow leadwire, 24 a maximum continous current rating, rated 32vdc max. bulk packaging, same as hhg

in stock
BK/HKP BUSS

Bk/hkp buss bussmann, hkp panel-mount fuse holder, 1/4 inch x 1 1/4 inch fuses, bulk bussmann hkp-same as hkp.

in stock
BK/HTB-28I

Bk/htb-28i, bussmann, right angle panel mount fuse holder for 5 x 20mm and 1/4 inch x 1 1/4 inch fuses, bulk packed. bulk bussmann htb-28i

in stock
BPDMA104HXF1

Bpdma104hxf1, cole hersee, littelfuse, mtr series hard wired power distribution module. fuses are internally bussed to a single main power stud – one input powers four fuse circuits, accepts a broad range of fuse ratings for any type of on-board circuit, from 2 a to 60 a. rated 32 vdc. compact unit is gasket-sealed to protect fuses from moisture and contamination. pdm features silicone cover gasket. output circuits are designed for use with delphi terminals and cable seals for added environmental protection. terminal position assurance locks (tpas) are provided with the module for secondary locking of output wires. the mtr series 2+2 hard-wired box holds low to medium current fast-acting fuses and enhanced delay fuses - two mini bladed fuses and two jcase cartridge fuses. the unit utilizes the mini fuse for fast-acting circuit protection in a small form factor from 2-30a, 32 vdc. the unit also utilizes the jcase cartridge style fuse which provides enhanced delay for medium current circuits, has low voltage drop and can handle high inrush.

in stock
FHL12U

Fhl12u, bussmann, panel mount-lamp indicating military fuseholder, 30a, 90-250v, clear neon octagonal knob, 1 poles, max panel thickness: 1/8 inches, mil-f-19207/3, for military 1/4 inch x 1-1/4 inch fuse series: f60 and f07, f09. similar to commercial version hgc series

in stock
FHL18G1-2

Fhl18g1-2, bussmann, panel mount-lamp indicating military fuseholder, 20a, 23-33v, amber incandescent flat-sided knob, 1 poles, max panel thickness: 3/16 inches, mil-f-19207/9, for military fuse series: f02 and f03. similar to commercial version hkx

in stock
FHN26G1

Fhn26g1, bussmann, panel mount-lamp indicating military fuseholder, 30a, 250v, bayonet knob, 1 poles, max panel thickness: 3/16 inches, mil-f-19207/16, for military fuse series: f02 and f03. similar to commercial version hkp

in stock
FHN42W

Fhn42w, bussmann, panel mount-lamp indicating military fuseholder, 4a, 125v, 1 poles, max panel thickness: 1/8 inches, mil-f-19207/26 for military fuse series: fm01. similar to commercial version hwa-af

in stock
FHN55W

Fhn55w, bussmann, panel mount-lamp indicating military fuseholder, 30a, 250v, rfi shield knob, 1 poles, max panel thickness: 1/8 inches, mil-f-19207/16, for military fuse series: f02 and f03. similar to commercial version hkp/rfi

in stock
FMG-211

Fmg-214, bussman, full access automotive bolt in fuseholder for the amg fuse, 5/16-18 studs and black cover

in stock
HHM

Hhm, in-line fuseholder with cover for atm mini fuses. same as bussmann hhm and bk/hhm fuse holders.

in stock
HKP-EW

Hkp-ew, bussmann, hkp panel-mount fuse holder, 1/4 inch x 1 1/4 inch fuses. price good for stock on hand only.

in stock
HPG

Hpg, bussmann, panel mount fuse holder for 13/32 inch x 1 1/2 inch (10.3 x 38.1mm) fuse, bayonet style knob, 30a (20a with quick connect terminals), 600v ac

in stock
HRJ

Hrj, bussmann, in-line fuse holder for sfe fuses and 1/4 inch diameter x various length fuses. same item as bk/hrj.

in stock
HTB-62I

Htb-62i, bussmann, panel mount fuse holder for 5 x 20mm and 1/4 inch x 1 1/4 inch fuses, front panel hex nut, solder / .1875 inch quick connect in-line termination,

in stock
LMG5-1-001

Lmg5-1-001, bussmann transportation products, fuse holder. 5 fuse positions, maximum total combined rating is 300a continous, operating temperature: -40 c (-40 f) to 85 c (185 f), 001 means no fuse with cover, accepts up to 5 amg fuses.

in stock
PDM21001LXM

Pdm21001lxm, cole hersee, littelfuse, 280 style component hard wired box, hvw60 sealed power distribution module, 60 cavities, accepts max fuse size of 30a, ip67 sealed. the hwb60 series power distribution module is a hard-wired module for use with any 280 style components (i.e. mini-fuses, relays, diodes, resistors, etc.) and features 60 cavities creating a high density fuse module with a compact footprint. without internal bussing, it allows the flexibility of custom circuitry by the end user. wires simply plug into the back of the module using sealed delphi metri-pack series 280 tanged terminals.

in stock
PDM31001ZXM

Pdm31001zxm, cole hersee by littelfuse, hwb18, 18 way mini power distribution module, 18 cavities, max fuse rating of 30a per circuit, max continuous current of 200a, ip67/ip69k sealed. the hwb18 series power distribution module is a hard-wired module for use with any 280 style components (i.e. mini-fuses, relays, diodes, resistors, etc.) and features 60 cavities creating a high density fuse module with a compact footprint. without internal bussing, it allows the flexibility of custom circuitry by the end user. wires simply plug into the back of the module using sealed delphi metri-pack series 280 tanged terminals.

in stock
PDM71001ZXM

Pdm71001zxm, cole hersee by littelfuse, hwb60-ng 60 way fuse holder, with new assurelatchâ„¢, max fuse rating of 30a per circuit, max continuous current of 250a, ip67 sealed. the hwb60 series power distribution module is a hard-wired module for use with any 280 style components (i.e. mini-fuses, relays, diodes, resistors, etc.) and features 60 cavities creating a high density fuse module with a compact footprint. without internal bussing, it allows the flexibility of custom circuitry by the end user. wires simply plug into the back of the module using sealed delphi metri-pack series 280 tanged terminals. assurelatchâ„¢ yellow positive-sealing latches keep the cover securely in place while allowing for fast service.

in stock
  • Page:  
  • 1