Shop our commercial and milspec sensors electrical components.
Part Number | Description | Availability |
---|---|---|
003N0050 | 003n0050 danfoss thermostatic valve, immersion sensor max. pressure 50 bar. r 3/4 brass sensor pocket for thermostatic valve; 220mm. |
in stock |
003N0078 | 003n0078, danfoss sensor element for avta universal 77-149, 6.5 ft. |
in stock |
032U1251 | 032u1251 danfoss ev220b 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4 to 1 . this program is especially for oem applications demanding a robust solution and moderate flow rates. |
in stock |
042N7508 | 042n7508 danfoss ba024a. danfoss ba series high performance coilnon-demanding applications, with ip65, for valve range b, 9w ac / 15w dc • windings of class h insulated wire molded in the coil body • ambient temperature: up to +40 c • ip 00 version with din 43650 a spade connectors • ip 20 version with protective cap • ip 65 version with mounted cable plugsame as 042n8508. |
in stock |
084B2255 | 084b2255 danfoss tp78-05 network bridge for field bus communications, network bridge, ftt10-rs485, aka networks, |
in stock |
084Z2019 | 084z2019 danfoss mbt3270 temperature sensor. the flexible temperature sensor mbt 3270 can be used in many industrial applications such as: air compressors, mobile hydraulics and exhaust gas return systems. in other words application where robustness, size and performance are essentials. the sensor can be equipped with different sensing element (rtd, ntc and ptc) and is available with different electrical connections (cable, delphi metri pack, amp junior power timer, deutsch dt04 connectors mate with this). • robust, high protection against moisture• fixed measuring insert• brass or stainless steel• very low response times• temperature range up to 300 c for an article on the danfoss mbt 3270 used in car racing applications please click this link! |
in stock |
084Z4021 | 084z4021, is a danfoss “do it all” marine temperature sensor! the mbt 5560 has combined the technology of danfoss standard temperature sensors and the electrical connections from the mbs pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter. the mbt 5560 is designed for use in harsh industrial environments where reliable, robust and accurate equipment is required. the mbt 5560 temperature sensor is designed for use in harsh industrial environments where reliable, robust and accurate equipment is required. danfoss makes this sensor available with a wide selection of process and electrical connections.with mbt 5560 danfoss has combined the technology of the standard temperature sensors and the electrical connections from the mbs pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter. ultra compact design. acid-resistant stainless steel enclosure (aisi 316l). temperature range -50 c - +200 c. pt 1000 resistance element. output signals: 4 - 20 ma or ratiometric. protection tube: 8 mm. insertion length: 100mm. |
in stock |
084Z4105 | 084z4105 danfoss with mbt 3560 we have combined the technology of our standard temperature sensors and the electrical connections from the mbs pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter.the mbt 3560 is designed for use in harsh industrial enviroments where reliable, robust and accurate equipment is required. available with a wide selection of process and electrical connections. can be delivered with a 33 mm extension length which makes it possible to measure temperatures up to 200 c without damaging the built-in electronics. ultra compact design. acid-resistant stainless steel enclosure (aisi 316l). temperature range -50 c - +200 c. pt 1000 resistance element. output signals: 4 - 20 ma or ratiometric. protection tube: 8 mm. multiple insertion lengths: 50 mm- 250 mm. |
in stock |
112FW12-4 | 112fw12-4, honeywell, aviation grade proximity sensor, 100fw series, shielded 3-wire dc sinking (npn), n.o. proximity sensor, 0.625 in cylindrical housing , 20 ga, mil-w-16878/4 wire. nominal sensing distance of 2,41 mm 0,51 mm [.09 in .02 in ]. |
in stock |
122FW12-4 | 122fw12-4, honeywell, 100fw series, unshielded 3-wire dc sinking (npn), n.o. proximity sensor, 0.625 in cylindrical housing , 20 ga, mil-w-16878/4 wire. nominal sensing distance of 5,84 mm 0,76 mm [.23 in .03 in ]. |
in stock |
320FW04-5 | 320fw04-5, honeywell 300 fw series, two piece sensor, harsh environment, cylindrical, ecko, stainless steel, shielded, leadwire, normally open/closed, current sinking. |
in stock |
421SL10K | 421sl10k sensata bei linear position sensor. |
in stock |
604R4KL.15 | 604r4kl.15 sensata bei linear position sensor. |
in stock |
606R6KL.12 | 606r6kl.12 sensata bei linear position sensor. |
in stock |
7235-1-125 | 7235-1-125 sensata klixon 125 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. call us for higher volume discounts! |
in stock |
7235-1-80 | 7235-1-80 sensata klixon 80 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. call us for volume discounts! |
in stock |
7235-2-15 | 7235-2-15, klixon, sensata. 15 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single phase or three phase circuits operating at 60 to 1000 hz. for three phase ac circuit protection, a 28 vdc control circuit is required. one three phase relay or three single phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. see attached spec sheet. |
in stock |
7235-2-30 | 7235-2-30 sensata klixon 30 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. see attached spec sheet. |
in stock |
7235-2-35 | 7235-2-35 sensata klixon 35 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. see attached spec sheet. |
in stock |
7235-2-7 | 7235-2-7, klixon, sensata. 7 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single phase or three phase circuits operating at 60 to 1000 hz. for three phase ac circuit protection, a 28 vdc control circuit is required. one three phase relay or three single phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. see attached spec sheet. |
in stock |
7235-8-100 | 7235-8-100 sensata klixon 100 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. |
in stock |
7236-1-150 | 7236-1-150 sensata klixon 150 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. call us for higher volume discounts! |
in stock |
7236-1-175 | 7236-1-175 sensata klixon 175 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. |
in stock |
7236-1-200 | 7236-1-200 sensata klixon 200 amp overload sensor. klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. |
in stock |
7236-2-200 | 7236-2-200, 200 amp overload sensor. sensata klixon 7235 and 7236 overload sensing controls are designed for the remote sensing of overloads in aircraft electrical systems or other applicable remote systems. they are for the protection of 28 vdc circuits or for 120 vac single–phase or three–phase circuits operating at 60 to 1000 hz. for three–phase ac circuit protection, a 28 vdc control circuit is required. one three–phase relay or three single–phase relays with their coils wired in series may be used in the control circuit. with either arrangement, all three phases will trip open simultaneously when an overload exists in any one phase. |
in stock |