Shop in s - Page 16

672-5, electroswitch oak grigsby switch by electroswitch. same as 5-65171-400. pricing good for stock on hand only. oak 672 series presslight switch 10 amp snap action.

682-5, electroswitch switch base assembly, formerly oak grigsby.

6at2 honeywell micro switch at series toggle switch, spdt - 1 pole, 2 position, solder terminal, standard lever, fine silver contacts, long life construction, flat top plunger

6pa32, honeywell, roller lever arm for use with honeywell 1en and 1he series environment-sealed limit switches.

6s1456x, the switchcraft 6x1456x is a spst right angle switch with nickel finish and welded silver contacts. supplied with ivory knob installed. without the knob, this is the standard switchcraft 12013 switch. this switch replaces 6s1456.

6se801 honeywell environmentally sealed basic switch. 6se801 is a single pole normally closed circuit,5a at 250 vac, lead wire termination. very small package size, suitable - aircraft or. moist or dusty industrial environments.

702pb121, honeywell, pushbutton switch, consists of 2 hm series basic switches which do not necessarily operate simultaneously, spdt (2) contact arrangement, 2.5 amps (resistive) at 115v (400 cycles, 4 amps (resistive) at 28vdc.

7124-06 cole hersee littelfuse push-pull headlamp switch, three knob pull positions: in – mid – out. in = headlamps off; mid = parking lights and tail lights on; out = headlights and tail lights on black knob imprinted with sae headlamp symbol.

7496-04, cole hersee, special purpose rotary switch, for 12v dc systems, 8 ohm, ceramic insulator with embedded coil for effective heat dissipation, 7/16” -28 thread mounting stem, 15/32” (11.9mm) long, plated steel case, 1.32” (33.5mm) diameter, 0.88” (22.4mm) long, black plastic knob with metal insert and set screw, with round/bar black knob imprinted “panel lamps”, two blade terminals.

7500k14, eaton, toggle switch general purpose ac rated, 15 amps at 125v, 1pst, on-none-off circuitry, screw terminals. mounting nut included.

7502k13, eaton, general purpose toggle switch, ac rated, 15 amp at 125vac- 1pdt, on-off-on, screw terminals. allow 3-4 weeks for delivery if ordering more than what we show in stock.

7509k5, eaton, ac rated toggle switch, single pole, 1pdt, 10 amp at 250vac, mom on-off-mom on circuitry, screw terminals. allow 3-4 weeks for delivery if ordering more than what we show in stock.

75221-09, cole hersee, littelfuse electrical windshield wiper switch, electric wiper switch or use with johnson electric (formerly united technologies) motors, black plastic knob with metal insert and set screw, white imprint, plated steel case 1 3/8"" (34.9mm) diameter, 3/8"" (9.5mm) long, mounting stem 7/16"" -28 thread, .38"" (9.6mm) long, 5 blade terminals, internal 6a circuit breaker at 12v dc.

75236, cole hersee, littelfuse electrical windshield wiper switch, 12v or 24v dc, for two motors, for use with motors with dynamic parking, including robert bosch and sprague devices motors, sealed construction, including o-ring on the shaft, black plastic knob with metal insert and set screw, white imprint, mounting stem 7/16"" -28 thread, .45"" (11.4mm) long, diecast case 1 5/8"" (41.3mm) diameter, 8 blade terminals.

75600-02 cole hersee, littelfuse controls one 12v motor, one delphi (packard) 6-way male connector 2977042 (mates with 2977044), lead and connector assembly: 5.625"" (142.9mm) long, with dynamic parking, with intermittent delay feature for permanent magnet electric wiper motors, ensures dependable control of windshield wipers on heavy duty vehicles, nagative ground only, 4 positions: off-park - intermittent range - low - high, push-to wash one to three wipes after knob is released, black plastic knob with metal insert and set screw, with white sae washer-wiper symbol, diecast case 2 7/32"" (56.4mm) square, 1 13/16"" (46.0mm) long. 7/16 - 28 thread mounting stem 0.45"" (11.3mm) long, hexnut and lockwasher included. switches conform to sae j1455, sae j112a and sae j234.

75602-04 cole hersee, littelfuse electronic windhsield wiper switch, for one motor, 24v dc. with dynamic parking. with intermittent delay feature for permanent magnet electric wiper motors. ensures dependable control of windshield wipers on heavy duty vehicles. negative ground only. 4 positions: off-park - intermittent range - low - high. push-to wash one to three wipes after knob is released. black plastic knob with metal insert and set screw, with white sae imprint. diecast case 2 7/32"" (56.4mm) square, 1 13/16"" (46.0mm) long. 7/16 - 28 thread mounting stem 0.45"" (11.3mm) long. hexnut and lockwasher included. switches conform to sae j1455, sae j112a and sae j234. switch controls most two-speed wiper motors. microprocessor design. six color-coded wire leads, 5"" (127.0mm) long:red – powerblack – groundyellow – low speedwhite – high speedbrown – washerblue – park.

7560k5, eaton, general purpose ac rated toggle switch. two pole, 2pst (double pole single throw), on-none-off circuitry, rated at 15a 125vac, 10a @ 250vac, screw terminals.

7561k4, eaton, ac rated toggle switch, 15 amp at 125vac, 2pst, on-none-off circuitry, solder lug terminals. allow 3-4 weeks for delivery if ordering more than what we show in stock.

7565k5, eaton, ac rated toggle switch, 2 pole, 15a at 125vac, 2pdt, on-none-on circuitry, solder lug terminals

75705-01, cole hersee, littelfuse rotary reversing switch, 10a at 12v dc, 3 positions momentary on – off – momentary ofn2, spring return to off from both positions. key actuator with coded tumbler lock. mounting stem 13/16”-24 thread. internal o-ring seal. three screw terminals.

7582k6, eaton, ac rated toggle switch, single pole, 1pdt (single pole double throw) - on-none-on circuitry, rated at 6a at 250v, solder lug terminals. hardware included. ul/csa rated

75908 cole hersee, littelfuse high current disconnect switch, 2000a intermittent (30 sec on, 3 min off), 300a continuous, 6-36vdc, two positions: off-on. disconnects battery circuit only. mounting stem: 3/4"" -16 thread. fits panels up to 1/4"" (6.4mm) thick. terminals: two 1/2"" -20 copper studs. case: plated steel. sealing: sealed between shaft and mounting stem; case and terminal insulator.

7592k6, eaton, ac rated toggle switch, two pole, 6a at 125vac, 2pdt, on-none-on circuitry, solder lug terminals

76052-15, honeywell, 5000 series pressure switch with standard terminals, normally open, factory set at 15 psi, single circuit - 2 terminals.

Ms25068-21, 7662k7, eaton, ac rated heavy duty toggle switch, mil-s-83731 with lever seal, four pole, 4pdt, on-off-on circuitry, .468 inch bushing, .687 inch lever. screw terminals. ms25068-21