Shop in s - Page 31

Ms25089-5cr, otto. sealed military spec pushbutton switch. 10a, 3 terminal normally closed, screw terminals, momentary, red button. hardware included. same as otto p1-32321.

Ms25089-5g, otto controls mil spec sealed pushbutton switch. momentary switching action 4 lbs. screw terminals, circuitry is normally closed. 3 terminals. same as otto p1-72322.

B3-26141, ms27257-1, otto controls, subminiature basic switch, double break, snap-action, military grade, .200 inches wide, has solder terminals, 5 oz operating force, spdt-db, form z, and silver/gold high current contacts.

B3-22141, ms27257-2, otto controls, subminiature basic switch, double break, snap-action, military grade, .200 inches wide, has 1/8 inch long turret terminals, 5 oz operating force, spdt-db, form z, and silver/gold high current contacts.

Ms27903-2 safran (labinal power systems / eaton aerospace) switch uniform panel appearance pushbutton switches. moisture proof. 2pdt 4 circuit may be jumper to 2pdt. see attached pdf for colors-note-we can build these from stock even if store shows no stock-allow 1 week for delivery but they are ncnr.

Ms27903-5 safran (labinal power systems / eaton aerospace) uniform panel appearance pushbutton switches. moisture proof. 2pdt 4 circuit may be jumper to 2pdt. see attached pdf for colors-note-we can build these from stock even if store shows no stock-allow 1 week for delivery but they are ncnr. assembly items that are in stock need at least 24 hours to process prior to shipping.

P1-10052 similar to otto p1-11628 (spec sheet attached here) but with an added special resilient seal. the p1-10052 is a sealed push button switch with 4 lbs. momentary action. snap action mil grade, double break switch plus this version is a 2 circuit pushbutton switch. solder terminals. gray button (picture shows black but switch button is gray).

P1-10053, otto controls, special press-fit switch, 10 amps (resistive)and 1050vrms at 28vdc or 115vac, gray thermoplastic button, spdt, watertight per mil-prf-8805 design 3, temperature range -55 degress c to 85 degress c

P1-10057 otto switch. temperature range between -55 c to + 85 c. 28 vdc or 115 vac, 10 amp. dust tight. per mil-s-8805, design 2. nylon grey button. black and anodized aluminum alloy case. 2 circuits. please see drawing for more information.

P1-10176 otto pushbutton switch, press fit, spst, normally open, black button, 18 awg red & green wire leads with packard terminals.

P1-11121 otto controls sealed pushbutton switch. momentary action, snap action with positive tactile feel. normally open. solder terminals. black body, red button. rated at 10 amps.

P1-30120 otto rugged pushbutton switch. electrical life of 25,000 cycles at full load. positive tactile feel. spst. normally open. custom legend “press to test” on bezel. see attached pdf for additional specs.

P1-31115 otto pushbutton switch. solder terminals, normally open, 2.5 lbs. momentary. green button. refer to speciifcations for additional product information.

P1-31122w otto controls sealed rugged pushbutton switch. positive tactile feel. 10 amp. solder terminals. normally open. black button. water tight.

P1-31622w otto controls sealed pushbutton switch, 2 circuit, watertight seal, momentary snap action, black.

P1-32112, otto controls, pushbutton switch, style b, sealed military grade pushbutton switch. screw terminals, normal open circuitry, 2.5lbs momentary action, black button.

P1-32122w the otto p1 offers a mechanical life that is well beyond the 50,000 cycles required by mil-prf-8805. the double break switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. the inherent wiping action breaks welds and scrubs the contacts clean on every actuation. watertight sealing to commercial (ip68s) and military (mil-prf-8805 design 3) standards are available. black button.

P1-33622w otto rugged sealed,watertight 2 circuit momentary pushbutton switch. low level switching. black button. solder terminals. special order ncnr . allow 4-5 weeks for delivery.

P1-62112 otto sealed mil grade pushbutton switch, per mil-prf-8805/3, momentary, snap action, double break, screw terminals, normally open circuit, 2.5lbs momentary force, black button.

P1-71128, otto controls, pushbutton switch, style g, solder terminals, normally open circuitry, 2.5 lbs momentary action, gray button.

P1-80005 otto switch. momentary sealed, snap action, double break pushbutton switch. the p1 offers a mechanical life that is well beyond the 50,000 cycles required by mil-prf-8805. the double break switching mechanism has an incredibly fast transfer time, reducing arcing and increasing contact life. the inherent wiping action breaks welds and scrubs the contacts clean on every actuation. the p1 switch offers vastly improved life under extreme conditions found in most military environments. this version is a special single pole, normally open double break, .50 tall gray button, black alum case, dust tight design 2. see pdf.

P1-90024 otto special, rugged, watertight pushbutton switch per mil-std-810, 15/32 thread. spst, normally open, double break. red button, black anodized case.

P1-90093, otto, pushbutton switch - special case, .38 inch red button, 10a resistive at 28vdc or 115vac, watertight per mil-prf-8805, design 3, temperature range -55 degrees c to +65 degrees c.

P1-90128 otto special pushbutton switch with knurled shroud. p1 series are sealed, mil grade mil-prf-8805/3 momentary action, snap action, double break. see attached pdf.

P2-900002 otto special 2 position push button switch. 2-spst normally open switch, dust tight per mil-s-8805, black button, black anodized aluminum case. see pdf for exact specs.