Shop in s - Page 32

P3-30136 otto rugged, sealed, special p3 pushbutton switch. normally open, single pole single throw black anodized case and button. quick connect terminals.

P3-30308 otto switch, looking for a rugged, space saving e-stop switch? here’s the solution! the new p3-30308 rugged e-stop pushbutton push/pull switch is environmentally sealed. this new compact pushbutton switch from otto controls is ideal for rugged e-stop applications in hand held controllers or compact control panels where a full size e-stop switch is too large. high force push/pull action watertight to ip68s, red thermoplastic button, aluminum case, up to 10 amp resistive @ 28vdc/115vac 60hz.

P3-31111 otto controls sealed rugged pushbutton switch. ideal for low level switching as well as 20 amp duty. normally open momentary. red button.

P3-32114 otto rugged sealed momentary action pushbutton switch. normally open, screw terminals, yellow button

P3-60019 otto special rugged sealed pushbutton switch p3-60019 has .38 size black button, ip68s, black anodized aluminum case, quick connect terminals. sales limited to stock on hand.

P3-60033, similar to otto controls p3-62222 except special housing with 2 dflats. momentary action, sealed, snap-action, double break rugged pushbutton switch. 4 lbs operation force action. screw terminals, normally closed circuitry. black button. note-photo is representative of product family and is not exact.

P3-61112 otto switch. n.o. circuit. black button. see spec sheet.

P3-71111 pushbutton switch from otto controls is a sealed push button switch, normally open, 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder terminals. makes and breaks every time! less than 25 milliohms contact resistance because the otto design features inherent rocking action that breaks welds and wipes contacts clean. the p3-71111 is the commercial version of the p1 pushbutton switch, offering vastly improved life under extreme conditions found in some industrial environments. the pushbutton is sealed by a silicone boot operating on our patented “rolling sleeve”, providing longer life and smoother operation over a wide temperature range.

P3-71111w pushbutton switch from otto controls is a rugged push button switch is watertight sealed to ip68s! it has 2.5 lbs operating force, normally open , positive tactile feedback, red button, solder terminals. makes and breaks every time! less than 25 milliohms contact resistance because the otto design features inherent rocking action that breaks welds and wipes contacts clean. the p3 is the commercial version of the p1 pushbutton switch, offering vastly improved life under extreme conditions found in some industrial environments. the pushbutton on the p3-71111w is sealed by a silicone boot operating on our patented “rolling sleeve”, providing longer life and smoother operation over a wide temperature range.

P3-71112 otto controls pushbutton switch is a sealed push button switch, normally open, 2.5 lbs. operating force, positive tactile feedback, red button, solder terminals. makes and breaks every time! less than 25 milliohms contact resistance because the otto design features inherent rocking action that breaks welds and wipes contacts clean. the p3-71112 is the commercial version of the p1 pushbutton switch, offering vastly improved life under extreme conditions found in some industrial environments. the pushbutton is sealed by a silicone boot operating on our patented “rolling sleeve”, providing longer life and smoother operation over a wide temperature range.

P3-71121 otto sealed momentary normally open snap action pushbutton switch, solder terminals, red button.

P3-71212 otto switch. sealed momentary pushbutton switch. long life under extreme conditions. low level switching as well as 20 amp duty. normally closed. black button. solder terminals.

P3-72111 otto sealed momentary normally open snap action pushbutton switch, screw terminals, red button. ,p3-72111 otto sealed momentary normally open snap action pushbutton switch, screw terminals, red button.

P3-90009 special sealed otto controls p3 pushbutton switch. spnc (single pole normally closed), shrouded, black button, 2.5 lb op force. the p3 is the commercial version of the p1 pushbutton switch, offering vastly improved life under extreme conditions found in some industrial environments. the pushbutton is sealed by a silicone boot operating on our patented “rolling sleeve,” providing longer life and smoother operation over a wide temperature range. epoxy protects the contacts and terminals from hostile environments and solder flux.

P3-90011 otto pushbutton switch. this is a sealed, spdt, 2 circuit, black button, shrouded black anodized case with drain hole.

P3-90033 otto controls shrouded pushbutton switch, watertight per ip68s, .38 size button, 4 oz op force, spdt – double break normally open see attached pdf , black push button and case-see attached pdf for all specs!

P3-90093-3 otto rugged sealed pushbutton switch with horn symbol. spst normally open, yellow & black horn legend, water tight to ip68s, faston terminals.

P3-90127, otto controls, pushbutton switch, 10 amps (resistive)@ 28vdc and 115 vac, spst-no-db schematic, electrical life: 100,000 cycles, black case with red button.

P3-90186 otto controls pushbutton switch, sealed, p3-90186 has a hex seal boot covering it, no legends or logos on it. p3 spdt sealed pushbutton switch with 24 inch wire leads, gray hexseal boot, red/yellow wire leads.

P3-90196 otto spdt-double break p3 rugged pushbutton switch with yellow polyester button, black horn graphic, black housing with a shroud.

P3-d111122 otto rugged sealed pushbutton switch, dome style, momentary action, flush dome, normally open, black bezel and button. moisture proof & dust tight to ip64. solder terminals. these rugged pushbutton switches feature new contoured dome styling. they offer excellent mechanical and electrical performance while operating under severe conditions found in demanding applications.

P4-10044 2 pole otto pushbutton switch. double pole double throw double break. splash and dusttight sealed, 2 pole, 4 circuit. operating force: 4.0 lbs. +/- 1.0 lb. circuit: dpdt 4 circuit. rating: 5 amps resistive 3 amps, inductive contacts: gold plate per mil-prf-8805/101-010, button: black nylon.

P4-10129, otto controls pushbutton switch. resistive load 5 amps at 28vdc- 118vac. button is black anodized aluminum alloy with lemon drop painted outer ring. housing is black anodized aluminum alloy. dust tight to ip6k8s. mounting hardware - internal tooth lockwasher and o-ring panel seal included. refer to specifications for additional information.

P4-10150 otto shrouded momentary action custom pushbutton switch, red button, black bezel, 5amp, simultaneous basics operations to within .010.

P4-10174 otto pushbutton switch momentary action, two step dpdt-double break custom pushbutton switch -40 threads, black aluminum alloy case and button. “o” ring panel seal, watertight panel seal, all hardware included.