Shop in s - Page 34

P6-24003, ms27240-1, sealed limit switch. complies with mil-prf-8805 sealing. 2pdt. one-piece housing. sealed at plunger with o-rings sealed at base with a glass seal. 72 inch leads.

P6-24004, ms27240-2, otto sealed limit switch. complies with mil-prf-8805 sealing. see attached spec sheet. one-piece housing. sealed at plunger with o-rings sealed at base with a glass seal. 72 inch leads.

P6-331120 otto sealed, waterproof, limit switch. single pole, roller lever, solder terminals. spno-double break circuitry. inch centers for 4-40 screws.

P7-111122, m8805/110-1112, otto controls, sealed subminiature momentary snap action pushbutton switch, solder terminals, military grade, short, normally open, standard contact ratings, black bezel, black button.

P7-111222, m8805/110-1412, otto sealed miniature mil grade momentary snap action pushbutton switch. solder terminals. normally open contacts. low level switching.

P7-121122, otto controls, sealed subminiature momentary snap action pushbutton switch, solder terminals, commercial grade, short, normally open, standard contact ratings, black bezel, black button.

P7-126122 otto controls rugged subminiature sealed mil style pushbutton switch. momentary action. 2 circuit. solder terminals. black button and body. sealed against dust and moisture.

P7-131142, otto switch push button n.o. spst round plunger 5a 115vac 28vdc solder panel mount.

P7-136221, m8805/110-1561, otto momentary action, military spec (m8805/110-1561), sealed sub-subminiature push button snap-action switch. the p7 series incorporates otto’s patented double break design in a significantly smaller package. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot. this version offers a short body, is watertight, has solder terminals, has 2 circuit low level switching, a black bezel and red button.

P7-216122, m8805/110-2162 otto pushbutton switch, sealed against dust & moisture the p7 series incorporates otto’s patented double break design in a significantly smaller package than the p1 series. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented “rolling sleeve” principle that gives long sealed life. this version is a military grade momentary action, normally open, 2 circuit switch with a black body and button. solder terminals.

P7-216128, m8805/110-2168, otto subminiature mil spec push button switch. solder terminals, 2 circuit momentary. sealed with black case and gray pushbutton.

P7-216222, m8805/110-2462, subminiature, rugged, sealed pushbutton mil grade switch. 2 circuit, low level switching. black body and button. solder terminals.

P7-236222, m8805/110-2562, otto momentary action, military spec (m8805/110-2562), sealed sub-subminiature push button snap-action switch. the p7 series incorporates otto’s patented double break design in a significantly smaller package. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot. this version offers a short body, is watertight, has solder terminals, has 2 circuit low level switching, a black bezel and black button.

P7-276122, otto momentary action, commercial grade, sealed sub-subminiature push button snap-action switch. the p7 series incorporates otto’s patented double break design in a significantly smaller package. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot. this version offers a short body, is watertight, has solder terminals, has 2 circuit low level switching, a black bezel and black button.

P7-300014 otto pushbutton switch subminiature. p7-300014 is a sealed, mil grade mil-prf-8805/110, momentary action spdt- db (double break) pushbutton swich, black anodized, d-flat on case, . 312 diameter black nylon button. design 2 mil sealed. design 2 sealed to ip68s & mil-prf-8805. nsn 5930-01-445-7947.

P7-300056, otto controls. mini pushbutton. 4 amps resistive load at 28 vdc. dust tight per mil-s-8805. case is silver anodized aluminum alloy. button is red nylon. electrical life of 50,000 cycles. includes mounting hardware of hexnut and lockwasher. refer to speciifcations for additional information.

M8805/110-3111, p7-311121 otto controls pushbutton switch. subminiature, sealed, military grade, momentary action pushbutton switch. the p7 series incorporates otto’s patented double break design in a significantly smaller package than the p1 series. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicone rubber boot, operating on a patented “rolling sleeve” principle that gives long sealed life and smooth operation. the p7-311121 from otto controls is designed to meet the requirements of milprf-8805 including low level switching (10ma @ 30mv) with power switching up to 5 amps at 28vdc as well. this version has solder terminals, is normally open, a black bezel and red button.

P7-331122, m8805/110-3212, otto, push button switch. sub miniature. long life. 5 amp sealed momentary snap action mil spec with positive tactile feedback. same as part # p7-331122.

P7-336229, m8805/110-3569, otto, mil spec water tight short style push button switch. 2 circuit momentary action. low level switching. black with a white button. solder terminals. the p7 series incorporates otto’s patented double break design in a significantly smaller package than the p1 series. these subminiature switches allow the switch density today’s technologies require in control grips and panels. the long life snap-action design is protected from the environment by a silicon rubber boot, operating on a “rolling sleeve” principle that gives long sealed life and smooth operation.

P7-375242, mil-prf-8805/110, otto, switch p7 series. the p7 series incorporates otto's patented double break design in a significantly smaller package than the p1 series. these subminiature switches embrace today's technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicone rubber boot, operating on a patented "rolling sleeve" principle that gives long sealed life and smooth operation. the p7 series is designed to meet the requirements of milprf-8805 including low level switching (10ma @ 30mv) with power switching up to 5 amps at 28vdc as well. solder/com. watertight/short. 5 terminal. low level. black/0.312. black button. high contact pressure. moisture proof. dust tight. positive tactile feedback.

P7-3a1141, otto controls, pushbutton switch, style 3, commercial solder terminals, normally open circuitry, standard contact rating, black bezel, red button.

P7-3a1142, otto controls, pushbutton switch, style 3, commercial solder terminals, normally open circuitry, standard contact rating, black bezel, black button.

P7-500001, otto controls, snap action pushbutton switch, watertight to mil-prf-m8805, black, 28vdc nsn fedstk 5930-01-362-0430 . see pdf drawing here.

P7-511121, m8805/110-5111, otto, subminiature pushbutton, snap action switch, solder terminal, n.o. black bezel, red button. meets the requirements of mil-prf-8805 with up to 5 amps at 28vdc.

P7-511122, m8805/110-5112, otto rugged snap action pushbutton switch. normally open. dust tight. black .160 button. 5 amps@28vdc.