Shop in s - Page 35

P7-511221, m8805/110-5411, otto, the p7 series subminiature switches embrace today's technology requirements by allowing for a large number of switches to fit within a faceplate or a small panel space.the long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a “rolling sleeve” principle that gives long sealed life and smooth operation. the p7 series is designed to meet the requirements of mil-prf-8805 including low level switching (10ma @ 30mv) with power switching up to 5 amps at 28vdc as well.

P7-521122 otto controls rugged snap action pushbutton switch. normally open. dust tight. internal silicon rubber boot seals out contaminants. black.160 button. 5 amps@28vdc.solder terminals.

P7-535121, m8805/110-5251 otto controls military spec subminiature sealed pushbutton switch. special 5 terminal design allows for custom circuitry, solder terminals, black body red button.

P7-566222 m8805/110-5862 push button switch. sub miniature, long life sealed momentary snap action mil spec with positive tactile feedback.

P7-571222, otto, subminiature pushbutton switch, momentary snap-action, solder terminals, 5 amps at 28vdc or 115vac, 60hz (at sea level), commerical watertight construction, short, normally open, low level contact rating, black bezel with black button.

P7-5a1121, otto controls, rugged snap action pushbutton switch, commercial grade, normally open. black bezel, red button. 5 amps@28vdc.

P7-616121, m8805/110-6161, otto controls, subminiature pushbutton switch, momentary action, sealed, snap action, 15/32 inch threaded bushing, short solder terminals, two circuits, standard contact ratings 5a at 28vdc, black bezel with red button

P7-631122, m8805/110-6212, otto rugged subminiature watertight, pushbutton switch, sealed against dust and moisture, mil grade mil-prf-8805/110, momentary action normally open, solder terminals, black bezel and black button.

P7-636222, m8805/110-6562, otto controls momentary action, sealed water tight sub miniature 2 circuit mil spec grade pushbutton switch. p7-636222 offers low level switching and solder terminals. button and body are black.

P7-656129 otto switch. long life mil grade sealed pushbutton switch. momentary 2 circuit. pc terminals. white button / black bezel.

P7-721122, otto momentary action, commercial grade, sealed sub-subminiature push button snap-action switch. the p7 series incorporates otto’s patented double break design in a significantly smaller package. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot. this version offers a short body, is watertight, has solder terminals, is normally open, a black bezel and black button.

P7-811228, m8805/110-8418 otto pushbutton switch, sealed against dust & moisture the p7 series incorporates otto’s patented double break design in a significantly smaller package than the p1 series. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented “rolling sleeve” principle that gives long sealed life. this version is a military grade momentary action with low level switching, normally open, black body and gray button. solder terminals.

P7-816128, m8805/110-8168 otto pushbutton switch, sealed against dust & moisture the p7 series incorporates otto’s patented double break design in a significantly smaller package than the p1 series. these subminiature switches embrace today’s technology requirements by allowing for a large number of switches to fit within a faceplate. the long life snap-action design is protected from the environment by a silicon rubber boot, operating on a patented “rolling sleeve” principle that gives long sealed life. this version is a military grade momentary action, normally open, 2 circuit switch with a black body and gray “guarded” button. solder terminals.

P7-900001, otto special rugged snap action mini pushbutton switch . two circuit. dust & moisture tight. red .375 button. silicon rubber seal gives long life and smooth operation. see pdf drawing here.

P7-900002, otto special rugged snap action mini pushbutton switch. 2 circuit. dust & moisture tight. black .375 button. silicon rubber seal gives long life and smooth operation. see pdf drawing here.

P7-900007 otto controls special mini pushbutton switch white button.

P7-900032 otto subminiature sealed pushbutton switch with momentary action, gray button 3/8 diameter button, moisture, proof black anodized, spdt double break n.o, n.c., see drawing for circuitry.

P7-900160 otto pushbutton switch. watertight . low level, waterproof to symbol 3 (mil), .375 black plastic button, black anodized case spdt-db. see pdf attached.

P7-900161 otto switch. the p7 series incorporates otto's patented double break design in a significantly smaller package than the p1 series. these subminiature switches embrace today's technology requirements by allowing for a large number of switches to fit within a faceplate or a small panel space. the long life snap-action design offers low contact resistance (25 milliohms max initial) and is protected from the environment by a silicone rubber boot, operating on a "rolling sleeve" principle that gives long sealed life and smooth operation.

P7-dfa1121, otto controls sealed domed momentary action pushbutton switch, attractive & rugged for wet & dusty environments. the p7-d pushbutton switch is a momentary switch with a contoured dome style pushbutton. the p7-d features a shorter behind panel depth, dust tight and moisture proof sealed construction excellent mechanical and electrical performance while operating under the most severe conditions. ul recognized, csa certified. this version is flush mount, solder terminals, and normally open momentary circuitry, black bezel with a red button.

P8-146522a, otto controls, subminiature double break momentary pushbutton switch, h style bezel, black case, solder terminals, 2 circuit contact configuration, low level contact rating, watertight seal construction, 4.0 lbs operating force momentary action, black button .375 inches diamter by .250 inches long, flat shaped.

P8-151312a, otto controls, sealed subminiature mementary pushbutton action switch, bezel style a, screw terminals, black case, normally open circuitry, watertight seal, 2.5 lbs momentary action, black button.

P8-361312g otto controls push button switch with push pull double circuit. this switch is shorter in length behind the panel than most precision pushbutton switches. the p8 offers positive tactile feedback and long life. fast on terminals and .312 black button.

P8-4000003 otto sealed subminiature double break pushbutton switch. spst with modified terminal spacing. dust tight, splash proof-see pdf for aircraft notes. the p8 series pushbutton switches feature a shortened back panel depth while offering all the features of the regular size p1 and p3 series switches. p8 series switches offer vastly improved electrical and mechanical life under extreme conditions found in most military and industrial environments. otto’s inherent rocking action breaks, welds and wipes contacts clean. this switch comes with faa/ pma marking. hardware is included.

P8-411215a otto rugged sealed, moisture proof momentary push button switch. subminiature double break. space saving short behind the panel design! normally open, this switch also has solder terminals and a green button.