Shop in ts - Page 3

699-3 kulka terminal block. single row general purpose phenolic terminal block. plated brass screw terminals. 150 volts. 3 pole. other sizes available. also known as 699-gp-3.

699-6 kulka block single row general purpose phenolic terminal block. plated brass screw terminals. 150 volts. 6 pole. other sizes available. also known as 699-gp-06

699-8 kulka terminal block. single row general purpose phenolic terminal block. plated brass screw terminals. 150 volts. 8 pole. other sizes available. also known as 699-gp-8.

699-jj-2102-2 is a 2 pole single row terminal block of jj (gdi-30f) material.

6tb24, marathon kulka, terminal block. single stud, double row, 600v, 30a, 60hz, with a recommended maximum wire size of 14 awg. qualified for mil-t-55164/12. same as a-a-59125/12-6tb24

Long desc 801-4-kt38-kt39 kulka marathon terminal block.4 pole with klip terminals. ul/csa/ce approved. 150 amp rating45 and 90 degree quick connect terminals already installed on this terminal block. photo not exact this is a four position

801-6-kt38/kt39 4 pole 6 position double row terminal block with riveted kt quick disconnect, both at 45 and 90 degree angles installed. please refer to spec sheet. photo is not exact, it shows an example of the family. this block is a 6 position. ul/cas/ce

812-9 marathon kulka terminal block same as 812-gp-09 and 812-09 kulka terminal block. 9 poles rated at 600v. 9/16 inch centers.

8tb10f, 8tb10, kulka mil style terminal block from marathon special products. 30 amp 60 hz, 10 pole, double row, 300 volt rating max, double stud double row for 14 awg wire. same as 8tb10f. compliant to a-a-59125/14 standards. mil-t-55164/14

Rugged heavy duty 3 pole terminal block deadfront type-85 amps, 600 volts ac/dc. same as kulka 985-gp-03 for wire range wire 4 through 18 awg copper wire only #4 - #18 awg copper wire only . 600 volts ac/dc (ul 1059 class c, use group - general industrial). short circuit current rated for 10,000 amps. factory and field wiring.

St722e2503, studded power feed thru terminal blocks st722e25xx (end mount)replace “xx” with 01 through 06 for number of poles, studded power block, feed thru, 175 amps, 300 volts, ac/dc. agency approvals: • ul recognized, ul 1059 terminal block standard, file no. xcfr2.e62806 • csa certified, csa c22.2 no. 158, file no. lr19766 • ce compliant to iec 60947-7-1 • rohs compliant

St722e2504 marathon special products power feed thru terminal block, 175a, 300v, 1/4"" brass studs, 4 poles. accommodates two hole compression lugs on .625” centers – wires #2 and larger may require narrow lugs.

Tb345-04, bussmann, double row terminal block, 4 poles, 45 amps, 600 v, 10-32 screw.