Outer diameter of flange is 2.000 inches, cut off on each side so that top and bottom arcs are 1.500 in. And vertical sides measure 1.500; 4 mounting holes are 0.170 in. In diam, 0.168 in. Apart in both directions; inner diameter is 0.635 at flange edge and 0.812 at opposite end
No other part numbers with same form, fit, and function found.
NSN 5930-01-326-4727
NSN 6685-00-492-9817
NSN 5996-00-644-4662
NSN 4140-01-324-7768
NSN 5835-00-228-9082
NSN 4140-01-149-1300
NSN 5975-01-472-1755
NSN 2925-01-250-2731
NSN 6105-01-290-4738
NSN 5960-00-921-5805
NSN 6240-01-622-0718
NSN 6220-01-578-5724
Last Updated: 06/30/2024