Item is 1/4 of a circle; it has 1 hole 0.38 min dia; center of hole is located 0.40 from the bottom and side straight edge; radius of circular side is .75 from the center of the hole. Every 30 degrees along the circular edge there is a small pie slice cutout; the 90 degrees corner is cut at a 45 degrees angle 0.125 long; mat (astmb194) is 0.012 thick and is bent up on the circular edge 0.380 down from the edge so that bent edge is 0.312 above the nonbent edge; plating is per mil-t-10727 type 1 0.0003 to 0.0005 thick
1 mounting device quantity, bolt mounting method, accommodates one item 7/8 in. Dia. , steel body material, zinc body surface treated
Plastic or plastic, phenolic body material, 0.375 inches diameter, 0.185 inches length, 3/8-24 thread size, part no. 1020 end item identification
Plastic or plastic, phenolic body material, 0.688 inches diameter, 0.594 inches length, cap for lamp socket usage design, friction mounting method
Plastic or plastic, phenolic body material, 0.688 inches diameter, 0.594 inches length, cap for lamp socket usage design, friction mounting method
0.147 inches unthreaded mounting hole diameter, 0.875 inches distance between mounting facility centers, 2 mounting facility quantity
Metal, nonferrous or aluminum body material, 3.500 inches diameter, 0.938 inches length, 3/12-2 thread size, type no. An/cpn-4 end item identification
NSN 5998-00-849-3362
NSN 6220-01-263-7281
NSN 6620-01-515-9597
NSN 6620-01-415-5803
NSN 5925-00-419-1950
NSN 4140-01-124-8904
NSN 6685-01-047-6494
NSN 5975-01-297-6169
NSN 6610-01-381-3181
NSN 5920-01-092-4233
NSN 5996-00-247-0854
NSN 7035-01-037-1744
Last Updated: 02/16/2025