National stock number 1377-01-382-1415 is available in the following condition(s).
Note: Availability of this item was last checked on 10/18/2023 and may no longer be available. Submit the form below to check current price and availability.
An item consisting of a quantity of propellant, a means of activation, and a time delay inclosed in a container. It may contain an integral cutting punch. It is designed to be inserted into or attached to one or more devices to provide energy required to operate devices requiring a time delay in their operating sequence. It is used in devices such as actuators, release mechanisms, cutters, and the like. For cartridges without a time delay, see cartridge, impulse.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).
HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.
PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Hazardous material.
Packaging and marking for hazardous materials shall comply with applicable requirements for performance oriented packaging contained in the international air transport association (iata) dangerous goods regulations or the international maritime dangerous goods code (imdg) and the code of federal regulations (cfr) title 29, title 40 and title 49. all performance test requirements shall be supported by certificates and reports attesting to the date and the results obtained from performance oriented packaging testing. the contractor, if not a self-certifier, shall be responsible for assuring that third party sources providing performance testing services are, in fact, registered with the department of transporation. the contractor's signed certification that the packaged configuration meets iata or imdg requirements shall be incorporated on the dd form 250, material inspection and receiving report, and other related acceptance documents if the dd form 250 is not used. all certificates and reports shall be available for inspection by authorized government representatives for a period of three years.
Special requirements. see specific instructions or drawings provided.
Special requirement. see specific instructions or drawings provided.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.
CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.
PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.
THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.
TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.