NSN 3010-00-009-5860

Gearcase-motor

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

1 EA

NIIN:

000095860

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "Gearcase-motor"

An item whose prime motion is produced by an electric motor driving through a geared mechanism which establishes the speed, direction and type of motion produced. The gearing may be integrally housed with the motor or coupled to a separately housed motor. For units with gearing mechanisms having a variable input/output ratio, manually or automatically selected, see motor-transmission.

Description

NSN 3010-00-009-5860. Gearcase-motor nsn 3010000095860. Overall height 1.375 inches

3010-00-009-5860 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAJT

Overall Height

1.375 inches

MRC:

AAJU

Overall Length

3.62 inches

MRC:

AAJV

Overall Width

1.375 inches

MRC:

AAUB

Hole Diameter

Between 0.094in. single end and 0.097in. single end ⁓7/64"

MRC:

ABWV

Shaft Diameter

0.187 inches single end and 0.1873 inches single end

MRC:

ACDC

Current Type

Ac input

MRC:

AJWZ

Hole Center To Shaft End Distance

0.12 inches single end and 0.14 inches single end

MRC:

AKCT

Shaft Rotation Direction

Clockwise single end

MRC:

AKPS

Duty Cycle

Continuous

MRC:

ANPZ

Inclosure Feature

Totally enclosed

MRC:

AXCP

Winding Type

Synchronous

MRC:

AXGY

Mounting Method

Flange

MRC:

AXHR

Mounting Facility Type and Quantity

4 unthreaded hole

MRC:

BFLY

Geared Head Output Shaft Alignment Position

Inline w/armature single end

MRC:

BFMF

Cooling Method

Nonventilated

MRC:

BKPH

Torque Rating and Type

1.6 foot-pounds running

MRC:

BKPP

Speed Control Method and Device Type

Electrical remote

MRC:

CBBL

Features Provided

Horizontal mounting position and vertical mounting position

MRC:

CWCS

Length Of Shaft From Housing

0.5 inches single end

MRC:

CWFQ

Mounting Facility Circle Diameter

1.148 inches

MRC:

CWGQ

Connection Type and Voltage Rating In Volts

115.0 line to neutral single input

MRC:

CWHK

Geared Head Output Shaft Speed Rating

1.3 single revolutions per minute single end

MRC:

CWHZ

Shaft End Characteristic

A13 single style single end

MRC:

FAAZ

Phase

Two input

MRC:

FREQ

Frequency In Hertz

400.0 input

MRC:

TTQY

Terminal Type and Quantity

3 wire lead

MRC:

ZZZV

Fsc Application Data

Test set, electronic system, specially designed, acft

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

9415M28P01

Cage Code:

07482

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

01102

FIIG:

A271A0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Air Force

MOE:

Rule:

FXGC

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

3.7 X 1.4 X 1.4

Paclk Weight:

0.5000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

85ZZ

PRES MAT:

WRAP MAT:

ICQ:

XXX

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) ZZ

See j.4.1.B.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

8483905000

NAICS:

333612

End Use Class:

21180

SITC:

74890

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8483905000

Parts Of Gearing, Gear Boxes and Other Speed Changers

End Use Code 21180

Industrial Machines, Other

Standard Intl. Trade Class (SITC) 74890

Parts, N.e.s., For Transmission Shafts and Cranks, Bearing Housings, Gears, Gearing, Ball Screws, Gear Boxes, Flywheels and Pulleys, Clutches, Etc.

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062070

NMF Description:

Gear Motors/parts Noi Sub2

UFC:

64910

LTL:

77.5

LCL:

WCC:

593

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements