NSN 4140-00-059-7575

Vaneaxial Fan
DEMIL
Shelf Life
UOM
NIIN
Demil:
NO
Shelf Life:
N/A
UOM:
1 EA
NIIN:
000597575
Stock Availability 

National stock number 4140-00-059-7575 is available in the following condition(s).

  • NS: 28
  • NE: 81
  • AR: 1
  • SV: 1

Note: Availability of this item was last checked on 10/12/2022 and may no longer be available. Submit the form below to check current price and availability.

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:

We do not share or sell your information to anyone.
Privacy | Terms

Definition Definition of approved item name (AIN): "FAN,VANEAXIAL"

A nonpositive displacement mechanical device with guide vanes and having an axial fan impeller(s) inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes and pressures.

4140-00-059-7575 Spec. NSN part characteristics

MRC
Name
Detail
MRC:
ABBB
Speed Adjustments
Single speed
MRC:
ABRY
Length
2.312 inches
MRC:
ADNK
Flow Direction
Inward
MRC:
ADZC
Environmental Protection
Weatherproof
MRC:
AEHY
Ambient Tempurature At Full Rated Power
-65.0 degrees celsius and 85.0 degrees celsius
MRC:
AEQC
Operating Speed At Rated Capacity In Rpm
22000.0
MRC:
AGBD
Electrical Connection Type
Terminal block
MRC:
AJLY
Static Pressure At Specificationified Air Flow Rate
0.0 inches of water
MRC:
AKCV
Drive Type
Direct
MRC:
AKDJ
Prime Mover Type
Electric motor
MRC:
AKNA
Inclosure Type
Fully enclosed
MRC:
AXHR
Mounting Facility Type And Quantity
2 rim
MRC:
AYSY
Rotation Direction For Which Designed
Clockwise
MRC:
CBBL
Features Provided
Nonsparking and radio interference shielding
MRC:
CQKX
Air Flow Rate
162.0 cubic feet per minute
MRC:
CSBH
Voltage In Volts And Current Type
200.0 ac
MRC:
CSYL
Prime Mover Power Rating
135.0 watts
MRC:
CWLX
Housing Inside Diameter
2.625 inches
MRC:
CWLY
Prime Mover Drive Shaft Bearing Type
Ball
MRC:
FAAZ
Phase
Three
MRC:
FREQ
Frequency In Hertz
400.0
MRC:
MATT
Material
Aluminum alloy
MRC:
SFTT
Surface Treatment
Enamel
MRC:
STYL
Style Designator
Fixed
MRC:
ZZZV
Fsc Application Data
Power supply, guided missile remote control system, airborne

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
AXIMAX3-341JH
Cage Code:
82877
RNCC:
5
RNVC:
1
DAC:
E
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
A0-19347
Cage Code:
82877
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
021030
Cage Code:
82877
RNCC:
3
RNVC:
2
DAC:
E
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
579R082H01
Cage Code:
97942
RNCC:
7
RNVC:
2
DAC:
A
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
AXIMAX3-341JS
Cage Code:
82877
RNCC:
5
RNVC:
9
DAC:
E
RNAAC:
CX
Status:
A
MSDS:
SADC:
Part Number:
021030000
Cage Code:
82877
RNCC:
3
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
V4S117K-5
Cage Code:
04810
RNCC:
5
RNVC:
2
DAC:
E
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Indicates a design/source control reference item
Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
04245
FIIG:
A087A0
Concept No.:
App. Key:
E
Cond. Code:
1
Status:
A

Part End Users MOE: Major organizational entities

Name
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Department of the Army
MOE:
DA
Rule:
A920
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Department of the Air Force
MOE:
DF
Rule:
FXGI
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Department of the Navy
MOE:
DN
Rule:
N9BZ
PICA:
GX
DSOR:
User:
SPAIN Spain
MOE:
YB
Rule:
YB01
PICA:
YB
DSOR:
User:
ISRAEL Israel
MOE:
YD
Rule:
YD01
PICA:
YD
DSOR:
User:
NEW ZEALAND New Zealand
MOE:
ZE
Rule:
ZE01
PICA:
ZE
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE:
ZH
Rule:
ZH01
PICA:
ZH
DSOR:
User:
UNITED KINGDOM United Kingdom
MOE:
ZK
Rule:
ZK01
PICA:
ZK
DSOR:
User:
NETHERLANDS Netherlands
MOE:
ZN
Rule:
ZN01
PICA:
ZN
DSOR:
User:
NORWAY Norway
MOE:
ZT
Rule:
ZT01
PICA:
ZT
DSOR:
User:
GREECE Greece
MOE:
ZU
Rule:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE:
ZW
Rule:
ZW01
PICA:
ZW
DSOR:
User:
NATO MAINTENANCE AND SUPPLY AGENCY NATO Maintenance and Supply Agency
MOE:
ZX
Rule:
ZX01
PICA:
ZX
DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
1.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
NA
MOP:
31
PKG:
60ZZ
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 31

Waterproof bag, sealed.

Cushion Material (CUSH) NA

Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.

Preservation Material (PRES_MAT) 00

No requirement.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B
NAIC
End Use
SITC
USDA
HITECH
Schedule B:
8414599080
NAICS:
333413
End Use Class:
41030
SITC:
74343
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 8414599080

Fans, Nesoi

End Use Code 41030

Household Appliances

Standard Intl. Trade Class (SITC) 74343

Fans, N.e.s.

Freight Universal and National freight and handling information

NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
061920
NMF Description:
Fans Elec Noi In Barrel/box/crate
UFC:
34690
LTL:
100.0
LCL:
--
WCC:
752
TCC:
Z
SHC:
9
ADC:
A
ACC:
H

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 752

Prefabricated structures & scaffolding.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

  Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements