NSN 5305-00-014-9211

Wood Screw

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

1 HD

NIIN:

000149211

Stock Availability

National stock number 5305-00-014-9211 is available in the following condition(s).

NS: 30253
AR: 1
NE: 4587

Note: Availability of this item was last checked on 09/28/2021 and may no longer be available. Submit the form below to check current price and availability.

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "SCREW,WOOD"

An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.

5305-00-014-9211 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AASB

Fastener Length

0.500 inches

MRC:

AASK

Head Style

Flat countersunk

MRC:

AASL

Head Diameter

Between 0.195 inches and 0.225 inches

MRC:

ABQZ

Internal Drive Style

Cross recess type 1

MRC:

CRGF

Nonmachine Thread Style

Gimlet point (type a, ab or ba)

MRC:

CRSQ

Countersink Angle

Between 80.0 degrees and 82.0 degrees

MRC:

CTYF

Nonmachine Thread Diameter

0.112 inches

MRC:

MATT

Material

Copper alloy

MRC:

MDCL

Material Specification

Qq-b-613, comp 6 or 7 federal specification single material response or qq-b-626, comp 6 or 7 federal specification single material response or qq-w-321 federal specification single material response

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

MS35492-210

Cage Code:

96906

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

FFS111STYLE6S

Cage Code:

81348

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

39422

Cage Code:

73734

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

01867

FIIG:

A003B0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

National Bureau of Standards

MOE:

Rule:

G42X

PICA:

DSOR:

User:

Department of the Army

MOE:

Rule:

A919

PICA:

DSOR:

User:

Department of the Air Force

MOE:

Rule:

FXGI

PICA:

DSOR:

User:

U.s. Marine Corps

MOE:

Rule:

MC47

PICA:

DSOR:

User:

Department of the Navy

MOE:

Rule:

N9BZ

PICA:

DSOR:

User:

Bureau of Prisons

MOE:

Rule:

G26X

PICA:

DSOR:

User:

Office of the Secretary of Transportation

MOE:

Rule:

G01X

PICA:

DSOR:

User:

U.s. Coast Guard

MOE:

Rule:

C918

PICA:

DSOR:

User:

National Institutes of Health

MOE:

Rule:

G65X

PICA:

DSOR:

User:

Bureau of Mines

MOE:

Rule:

G15X

PICA:

DSOR:

User:

Bureau of Reclamation

MOE:

Rule:

G37X

PICA:

DSOR:

User:

Bonneville Power Administration

MOE:

Rule:

G81X

PICA:

DSOR:

User:

Bureau of the Mint

MOE:

Rule:

G10X

PICA:

DSOR:

User:

National Aeronautics and Space Administration

MOE:

Rule:

G880

PICA:

DSOR:

User:

Panama Canal Company

MOE:

Rule:

G06X

PICA:

DSOR:

User:

General Services Administration

MOE:

Rule:

G76X

PICA:

DSOR:

User:

Tennessee Valley Authority

MOE:

Rule:

G90X

PICA:

DSOR:

User:

Spain

MOE:

Rule:

YB01

PICA:

DSOR:

User:

Canada

MOE:

Rule:

ZC01

PICA:

DSOR:

User:

Greece

MOE:

Rule:

ZU01

PICA:

DSOR:

User:

Turkey

MOE:

Rule:

ZW01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

27A0

PRES MAT:

WRAP MAT:

ICQ:

100

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

7415330500

NAICS:

332722

End Use Class:

12300

SITC:

69433

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 7415330500

Threaded Copper Screws For Wood

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69433

Screws, Bolts, Nuts, Washers and Similar Articles, Threaded, Of Copper

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

096630

NMF Description:

Screws Noi Brass/bronze/copper

UFC:

50590

LTL:

70.0

LCL:

WCC:

713

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 713

Metal hardware.

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements