NSN 5306-01-656-1602

Shear Bolt

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

NIIN:

016561602

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "BOLT,SHEAR"

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

5306-01-656-1602 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAJD

Thread Class

MRC:

AAJF

Thread Direction

Right-hand

MRC:

AASA

Thread Length

0.370 inches

MRC:

AASB

Fastener Length

Between 5.855 inches and 5.885 inches

MRC:

AASK

Head Style

Hexagon

MRC:

AASU

Head Height

Between 0.125 inches and 0.140 inches

MRC:

AATB

Width Between Flats

Between 0.429 inches and 0.439 inches

MRC:

AAUR

Grip Diameter

Between 0.2485 inches and 0.2495 inches

MRC:

AGAV

End Application

1055-01-536-7106

MRC:

AHYM

Thread Diameter

0.2500 inches

MRC:

ANEE

Grip Length

Between 5.49 inches and 5.51 inches

MRC:

CMLP

Thready Qty Per Inch (tpi)

MRC:

CQBC

Min. Tensile Strength (psi)

160000 pounds per square inch

MRC:

CSYM

Surface Finish

32.0 microinches

MRC:

CXCY

Part Name Assigned By Controlling Agency

Bolt, tension, hex head, close tolerance, alloy steel, short thread, reduced major thread dia., self-locking and nonlocking, 160 ksi ftu

MRC:

MATT

Material

Steel comp 4140 or steel comp 4340 or steel comp 8740

MRC:

MDCL

Material Specification

Ams6349 or ams6382 national std/spec 1st material response or ams6415 or ams6484 national std/spec 2nd material response or ams6322 national std/spec 3rd material response

MRC:

SFTT

Surface Treatment

Cadmium

MRC:

STDC

Surface Treatment Specification

Ams-qq-p-416, type ii, class 2 national std/spec single treatment response

MRC:

THSD

Thread Series Designator

Unjf

MRC:

ZZZK

Specification Data

80205-nas6203 through 6220 professional/industrial association standard

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

NAS6204-88

Cage Code:

80205

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

NAS6204-88

Cage Code:

64059

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

15903

FIIG:

A003B0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Army

MOE:

Rule:

A919

PICA:

DSOR:

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

01A0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

093486

NMF Description:

Noi (sub 3) Nuts Or Screws Bolts

UFC:

48950

LTL:

Rating variable

LCL:

WCC:

573

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements