NSN 5905-00-006-2978

Film Fixed Resistor

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

1 EA

NIIN:

000062978

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "Film Fixed Resistor"

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes carbon composition type resistors.

Description

NSN 5905-00-006-2978. Body length 0.375 inches; body diameter 0.125 inches; power dissipation rating in watts 0.125 free air

5905-00-006-2978 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAPE

Temperature Coefficient Of Resistance In Ppm Per Degree Celsius

-100 to +100

MRC:

AAPP

Electrical Resistance

30.1 ohms

MRC:

AAPQ

Resistance Tolerance In Percent

-1 to 1

MRC:

AAQF

Ambient Temperature In Degree Celsius At Full Rated Power

125

MRC:

AAQG

Ambient Temperature In Degree Celsius At Zero Percent Rated Power

175

MRC:

AAQH

Temperature Range Of Temperature Coefficient In Degree Celsius

-55 to +175

MRC:

AAQZ

Inclosure Method

Encapsulated

MRC:

AARB

Terminal Type

Wire lead

MRC:

AARG

Reliability Indicator

Established

MRC:

AARH

Reliability Failure Rate Level In Percent

0.001

MRC:

ABPM

Body Diameter

0.125 inches

MRC:

ADAQ

Body Length

0.375 inches

MRC:

AEFB

Power Dissipation Rating In Watts

0.125 free air

MRC:

STYL

Style Designator

Axial terminal each end

MRC:

TEST

Test Data Document

81349-milr55182 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type d

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

SPS-N-347-30.38

Cage Code:

75042

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RN60B30R1F

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RNC60K30R1FS

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

MILR55182-3

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

4033Z-30P0RM1%

Cage Code:

U1395

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

6558-133

Cage Code:

80138

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

MILR10509-1

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RN60D30R1F

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RNC60K30R1FM

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RNC60K30R1FP

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RNC60K30R1FR

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

RNR60K30R1FM

Cage Code:

81349

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

05311

FIIG:

A001A0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Army

MOE:

Rule:

A918

PICA:

DSOR:

User:

Department of the Air Force

MOE:

Rule:

FXGX

PICA:

DSOR:

User:

Department of the Navy

MOE:

Rule:

N9BN

PICA:

DSOR:

User:

Federal Aviation Administration

MOE:

Rule:

BGX1

PICA:

DSOR:

User:

National Aeronautics and Space Administration

MOE:

Rule:

G170

PICA:

DSOR:

User:

National Aeronautics and Space Administration

MOE:

Rule:

G860

PICA:

DSOR:

User:

Brazil

MOE:

Rule:

YA01

PICA:

DSOR:

User:

Spain

MOE:

Rule:

YB01

PICA:

DSOR:

User:

Singapore

MOE:

Rule:

YJ01

PICA:

DSOR:

User:

Malaysia

MOE:

Rule:

YW01

PICA:

DSOR:

User:

Thailand

MOE:

Rule:

YY01

PICA:

DSOR:

User:

Australia

MOE:

Rule:

ZA01

PICA:

DSOR:

User:

Canada

MOE:

Rule:

ZC01

PICA:

DSOR:

User:

New Zealand

MOE:

Rule:

ZE01

PICA:

DSOR:

User:

Germany

MOE:

Rule:

ZG01

PICA:

DSOR:

User:

Republic of Korea

MOE:

Rule:

ZH01

PICA:

DSOR:

User:

Portugal

MOE:

Rule:

ZP01

PICA:

DSOR:

User:

Greece

MOE:

Rule:

ZU01

PICA:

DSOR:

User:

Turkey

MOE:

Rule:

ZW01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

Electrostatic Discharge (ESD) B

Represents items with esd sensitivity.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

69F0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) ZZ

Special requirements.

Method of Preservation (MOP) GX

Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

8533100042

NAICS:

334416

End Use Class:

20005

SITC:

77231

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8533100042

Fixed Carbon Resistors, Composition Or Film Type, Designed For Surface Mounting, Having Two Terminals

End Use Code 20005

Electric Apparatus

Standard Intl. Trade Class (SITC) 77231

Fixed Carbon Electrical Resistors, Composition Or Film Types

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062960

NMF Description:

Reostats/parts Noi

UFC:

35140

LTL:

77.5

LCL:

WCC:

658

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) 3

Electrostatic sensitive device (esd).

Water Commodity (WCC) 658

Electrical appliances, small.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements