NSN 5930-00-003-7706

Rotary Switch

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

NIIN:

000037706

Stock Availability

National stock number 5930-00-003-7706 is available in the following condition(s).

NS: 3729
NE: 7390
AR: 2
OH: 1
SV: 1

Note: Availability of this item was last checked on 05/06/2020 and may no longer be available. Submit the form below to check current price and availability.

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "SWITCH,ROTARY"

A switch actuated by a definite angular rotation of the switch shaft about its axis. For items having rated actuation travel and pressure characteristics, see switch, sensitive. Excludes relay, rotary; switch, stepping; and switch, telephone (as modified).

5930-00-003-7706 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAJD

Thread Class

2a single mounting facility

MRC:

AASA

Thread Length

0.410 inches single mounting facility

MRC:

ABFE

Hazardous Locations/environmental Protection

Explosion proof

MRC:

ABHP

Overall Length

4.914 inches

MRC:

ABNB

First Flat Length

0.250 inches single actuator

MRC:

ABNC

Flat Height

0.208 inches single actuator and 0.212 inches single actuator

MRC:

ABWV

Shaft Diameter

0.248 inches single actuator and 0.252 inches single actuator

MRC:

ABXF

Shaft Length

0.780 inches single actuator

MRC:

ADAV

Overall Diameter

1.172 inches

MRC:

AFBH

Individual Section Quantity

MRC:

AFDC

Nonturn Device Type

Slotted bushing at 12: 00 o'clock

MRC:

AFGA

Operating Tempurature Range

-65.0 to 125.0 degrees celsius

MRC:

AJZE

Switch Contact Basic Design

Nonpile-up symmetrical

MRC:

AKPX

Pole Quantity

1 each section front

MRC:

AKPY

Throw Quantity

12 each section rear

MRC:

AXGY

Mounting Method

Threaded bushing single mounting facility

MRC:

CQJX

Thread Size

0.375 inches single mounting facility

MRC:

CQMK

Contact Voltage Rating In Volts

28.0 dc at sea level

MRC:

CQRQ

Shaft Flat/slot Angular Location

180.0 degrees from contact position 1 single actuator

MRC:

CQTH

Rotor Through Connection Quantity

1 each section

MRC:

CRJH

Switch Actuator Indexing Position Quantity

12 single actuator

MRC:

CRSJ

Shaft Type

Round, flatted single actuator

MRC:

CSCF

Terminal Type

Tab, solder lug

MRC:

CSHW

Contact Switching Action

Breaks before makes each section rear

MRC:

CSLC

Switch Actuator Positioning Increment

30.0 degrees single actuator

MRC:

CTHF

Contact Load Current Rating

1.0 amperes resistive load dc at sea level and 500.0 milliamperes inductive load dc at sea level

MRC:

STYL

Style Designator

Tap, circular, bushing mount

MRC:

TEST

Test Data Document

81349-mil-s-3786/4 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

MRC:

THSD

Thread Series Designator

Unef single mounting facility

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

1-44M30-10C12NC

Cage Code:

81073

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

27-190710C12NC-2

Cage Code:

91812

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

G80FC12G10C2C

Cage Code:

12464

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

1-44M30-10C12NC-2

Cage Code:

81073

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

02134

FIIG:

A052B0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Defense Logistics Agency

MOE:

Rule:

DGX1

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.2000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

69F0

PRES MAT:

WRAP MAT:

ICQ:

XXX

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) ZZ

See j.4.1.B.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

8536509020

NAICS:

335931

End Use Class:

20005

SITC:

77255

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8536509020

Switches, Rotary, Rated At Not Over 5 A, For A Voltage Not Exceeding 1, 000 V

End Use Code 20005

Electric Apparatus

Standard Intl. Trade Class (SITC) 77255

Switches For Electrical Apparatus, N.e.s., For Voltages Not Exceeding 1, 000 Volts

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

061300

NMF Description:

Circuit Breaker/switch Noi

UFC:

34410

LTL:

77.5

LCL:

WCC:

72D

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 72D

Communications/electronics, other than sigint/ew or comsec repair parts and components.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements