NSN 5990-00-043-4027

Transmitter Synchro

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

NIIN:

000434027

Stock Availability

National stock number 5990-00-043-4027 is available in the following condition(s).

NE: 1
SV: 1

Note: Availability of this item was last checked on 03/16/2023 and may no longer be available. Submit the form below to check current price and availability.

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "SYNCHRO,TRANSMITTER"

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.

5990-00-043-4027 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAFZ

Body Material

Aluminum

MRC:

AAQL

Body Style

Standard round c

MRC:

AAVH

Shoulder Diameter

Between 0.8118 inches and 0.8123 inches

MRC:

AAVL

Pilot Diameter

Between 0.4995 inches and 0.5000 inches

MRC:

ABHP

Overall Length

1.6160 inches

MRC:

ABKK

Flange Diameter

Between 0.9360 inches and 0.9370 inches

MRC:

ABKU

Flange Thickness

0.0630 inches

MRC:

ABPA

Undercut Diameter

0.8400 inches

MRC:

ABPC

Undercut Width

0.0620 inches

MRC:

ABWV

Shaft Diameter

0.0895 inches single shaft and 0.0900 inches single shaft

MRC:

ABXF

Shaft Length

0.3750 inches single shaft

MRC:

AJSL

Body Size

MRC:

AJSR

Rotor Input Voltage Rating In Volts

26.0

MRC:

AJSS

Frequency In Hertz

400.0

MRC:

AJST

Rotor Input Current Rating

90.0 milliamperes

MRC:

AJSV

Rotor Input Electrical Power Rating

440.0 milliwatts

MRC:

AJSW

Zro Resistance In Ohms

54.00

MRC:

AJSY

Zso Resistance In Ohms

13.00

MRC:

AJTA

Zrs Resistance In Ohms

80.00

MRC:

AJTS

Rotor Dc Resistance In Ohms

33.00

MRC:

AJTT

Stator Dc Resistance In Ohms

11.60

MRC:

AJVF

Phase Shift Angle In Deg

6.500 input to output

MRC:

AJVH

Maximum Total Null Voltage Output In Millivolts Per Volt

30.00

MRC:

AJVL

Electrical Error Angular Range In Minutes

-6.0 to 6.0

MRC:

AJVS

Actuator Friction Torque At Minus 55 Deg Celsius

16.00 centimeter-grams

MRC:

AJVT

Actuator Friction Torque At Plus 25 Deg Celsius

4.00 centimeter-grams

MRC:

AJVV

Torque Gradient Per Angular Deg

1800.0 millimeter-milligrams

MRC:

AJVW

Alignment Hole Quantity

MRC:

AJWQ

Pilot Length

0.0380 inches

MRC:

AJWR

Shoulder Length

0.0620 inches

MRC:

AJWX

Mounting Surface To Terminal End Distance

1.2410 inches

MRC:

CQTM

Terminal Location

Rear

MRC:

CQXQ

Plus J Zro Reactance In Ohms

285.00

MRC:

CQZS

Shaft Slot Depth

0.0300 inches single shaft

MRC:

CRGZ

Plus J Zso Reactance In Ohms

50.00

MRC:

CRHN

Shaft Slot Width

0.0200 inches single shaft

MRC:

CRKL

Plus J Zrs Reactance In Ohms

26.00

MRC:

CRSJ

Shaft Type

Round, slotted single shaft

MRC:

CRSY

Alignment Hole Depth

0.0500 inches

MRC:

CTCW

Alignment Hole Bolt Circle Diameter

0.6780 inches

MRC:

TTQY

Terminal Type And Quantity

5 wire lead

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

1001187

Cage Code:

99564

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

1001187

Cage Code:

07421

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

02073

FIIG:

A07800

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Singapore

MOE:

Rule:

YJ01

PICA:

DSOR:

User:

Turkey

MOE:

Rule:

ZW01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

9014900000

NAICS:

334511

End Use Class:

22220

SITC:

87412

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 9014900000

Parts & Accessories For Direction Finding Compasses and Other Navigational Instruments and Appliances

End Use Code 22220

Marine Engines, Parts

Standard Intl. Trade Class (SITC) 87412

Parts and Accessories Of Navigational Instruments and Appliances

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062120

NMF Description:

Generators/motors/parts Noi

UFC:

34760

LTL:

Rating variable

LCL:

WCC:

658

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 658

Electrical appliances, small.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements