NSN 5990-00-062-5235

Electrical Resolver
DEMIL
Shelf Life
UOM
NIIN
Demil:
NO
Shelf Life:
N/A
UOM:
1 EA
NIIN:
000625235

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:

We do not share or sell your information to anyone.
Privacy | Terms

Definition Definition of approved item name (AIN): "RESOLVER,ELECTRICAL"

An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes transolver, electrical and potentiometer sine/cosine electrical resolvers.

5990-00-062-5235 Spec. NSN part characteristics

MRC
Name
Detail
MRC:
AAFZ
Body Material
Steel, stainless
MRC:
AAQL
Body Style
Standard round b
MRC:
AAVH
Shoulder Diameter
1.3120 inches
MRC:
AAVL
Pilot Diameter
0.8750 inches
MRC:
ABHP
Overall Length
2.4660 inches
MRC:
ABKK
Flange Diameter
1.4370 inches
MRC:
ABKU
Flange Thickness
0.0930 inches
MRC:
ABPC
Undercut Width
0.0780 inches
MRC:
ABWV
Shaft Diameter
0.1900 inches single shaft
MRC:
ABXF
Shaft Length
0.5400 inches single shaft
MRC:
AFJN
Fragility Factor
Moderately rugged
MRC:
AJSL
Body Size
15
MRC:
AJSR
Rotor Input Voltage Rating In Volts
50.0
MRC:
AJSS
Frequency In Hertz
5000.0
MRC:
AJSW
Zro Resistance In Ohms
21.00
MRC:
AJSY
Zso Resistance In Ohms
21.00
MRC:
AJTA
Zrs Resistance In Ohms
8.80
MRC:
AJTS
Rotor Dc Resistance In Ohms
4.80
MRC:
AJTT
Stator Dc Resistance In Ohms
4.00
MRC:
AJTW
Transformation Ratio Equality In Percent
0.3
MRC:
AJTX
Compensation Method
Winding compensated
MRC:
AJVH
Maximum Total Null Voltage Output In Millivolts Per Volt
50.00
MRC:
AJVL
Electrical Error Angular Range In Minutes
-10.0 to 10.0
MRC:
AJVM
Spline Tooth Quantity
21 single shaft
MRC:
AJVW
Alignment Hole Quantity
4
MRC:
AJWQ
Pilot Length
0.0400 inches
MRC:
AJWR
Shoulder Length
0.1320 inches
MRC:
AJWX
Mounting Surface To Terminal End Distance
1.7070 inches
MRC:
AJXA
Spline Tooth Diametral Pitch
120 single shaft
MRC:
AJYY
Shaft Thread Series Designator
Unf single shaft
MRC:
AKAF
Shaft Thread Direction
Right-hand single shaft
MRC:
AKAN
Shaft Thread Class
2a single shaft
MRC:
CQTM
Terminal Location
Rear
MRC:
CQWQ
Shaft Thread Length
0.2000 inches single shaft
MRC:
CQXQ
Plus J Zro Reactance In Ohms
130.00
MRC:
CRGZ
Plus J Zso Reactance In Ohms
140.00
MRC:
CRKL
Plus J Zrs Reactance In Ohms
11.00
MRC:
CRSJ
Shaft Type
Spline w/threads single shaft
MRC:
CRSY
Alignment Hole Depth
0.1250 inches
MRC:
CSJY
Transformation Ratio
1.100 rotor to stator
MRC:
CTCW
Alignment Hole Bolt Circle Diameter
1.1000 inches
MRC:
CWBH
Shaft Thread Size
0.190 inches single shaft
MRC:
TTQY
Terminal Type And Quantity
2 screw

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
347C648H01
Cage Code:
97942
RNCC:
3
RNVC:
2
DAC:
1
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
CZC15KS06A307
Cage Code:
99932
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
TX
Status:
A
MSDS:
SADC:
Part Number:
VRS15-50A2
Cage Code:
10651
RNCC:
5
RNVC:
9
DAC:
1
RNAAC:
TA
Status:
A
MSDS:
SADC:
Indicates a design/source control reference item
Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
22966
FIIG:
A07800
Concept No.:
App. Key:
A
Cond. Code:
1
Status:
A

Part End Users MOE: Major organizational entities

Name
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE AIR FORCE Department of the Air Force
MOE:
DF
Rule:
FXGX
PICA:
GX
DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
0.6000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
U
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
DA
MOP:
51
PKG:
69F0
PRES MAT:
00
WRAP MAT:
FA
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B
NAIC
End Use
SITC
USDA
HITECH
Schedule B:
9018903000
NAICS:
339112
End Use Class:
21610
SITC:
87229
USDA:
1
HITECH:
2

Schedule B Codes Definitions:

Schedule B 9018903000

Anesthetic Instruments and Appliances and Parts and Accessories

End Use Code 21610

Medicinal Equipment

Standard Intl. Trade Class (SITC) 87229

Instruments and Appliances Used In Medical, Surgical Or Veterinary Sciences, N.e.s.

Freight Universal and National freight and handling information

NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
062120
NMF Description:
Generators/motors/parts Noi
UFC:
34760
LTL:
Rating variable
LCL:
--
WCC:
593
TCC:
Z
SHC:
9
ADC:
A
ACC:
V

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

  Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements