NSN 5990-00-072-5450

Control Transformer Synchro

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

1 EA

NIIN:

000725450

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "SYNCHRO,CONTROL TRANSFORMER"

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

5990-00-072-5450 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAFZ

Body Material

Steel, corrosion resisting

MRC:

AAQL

Body Style

Standard round, rotatable stator c

MRC:

AAVH

Shoulder Diameter

Between 0.6950 inches and 0.7050 inches

MRC:

AAVL

Pilot Diameter

Between 0.4995 inches and 0.5000 inches

MRC:

ABHP

Overall Length

3.1830 inches

MRC:

ABKK

Flange Diameter

0.9100 inches

MRC:

ABKU

Flange Thickness

Between 0.0570 inches and 0.0670 inches

MRC:

ABPA

Undercut Diameter

Between 0.7360 inches and 0.7460 inches

MRC:

ABPC

Undercut Width

0.0570 inches

MRC:

ABWV

Shaft Diameter

0.1195 inches single shaft and 0.1200 inches single shaft

MRC:

ABXF

Shaft Length

0.7030 inches single shaft and 0.7330 inches single shaft

MRC:

AEBZ

Schematic Diagram Designator

1 y-rotor, 1 stator

MRC:

AHCG

Maximum Tempurature Rise

5.0 degrees celsius

MRC:

AJSL

Body Size

MRC:

AJSN

Stator Input Voltage Rating In Volts

11.8

MRC:

AJSP

Stator Input Current Rating

40.0 milliamperes

MRC:

AJSQ

Stator Input Electrical Power Rating

100.0 milliwatts

MRC:

AJSS

Frequency In Hertz

400.0

MRC:

AJSW

Zro Resistance In Ohms

446.00

MRC:

AJSY

Zso Resistance In Ohms

79.00

MRC:

AJTA

Zrs Resistance In Ohms

548.00

MRC:

AJTS

Rotor Dc Resistance In Ohms

316.00

MRC:

AJTT

Stator Dc Resistance In Ohms

67.00

MRC:

AJVF

Phase Shift Angle In Deg

6.000 input to output

MRC:

AJVG

Maximum Fundamental Null Voltage In Millivolts Per Volt

30.00 output

MRC:

AJVH

Maximum Total Null Voltage Output In Millivolts Per Volt

60.00

MRC:

AJVL

Electrical Error Angular Range In Minutes

-7.0 to 7.0

MRC:

AJVS

Actuator Friction Torque At Minus 55 Deg Celsius

20.0 centimeter-grams

MRC:

AJVT

Actuator Friction Torque At Plus 25 Deg Celsius

30.0 centimeter-grams

MRC:

AJWG

Shaft Maximum Radial Play

0.0010 inches

MRC:

AJWH

Shaft End Play

0.0020 inches

MRC:

AJWQ

Pilot Length

Between 0.0380 inches and 0.0480 inches

MRC:

AJWR

Shoulder Length

Between 0.0570 inches and 0.0670 inches

MRC:

AJWX

Mounting Surface To Terminal End Distance

2.0000 inches

MRC:

AJXB

Shaft Maximum Runout

0.0020 inches

MRC:

CQTM

Terminal Location

Rear

MRC:

CQXQ

Plus J Zro Reactance In Ohms

1887.00

MRC:

CRGZ

Plus J Zso Reactance In Ohms

350.00

MRC:

CRKL

Plus J Zrs Reactance In Ohms

182.00

MRC:

CRSJ

Shaft Type

Round single shaft

MRC:

CSJY

Transformation Ratio

2.159 rotor to stator

MRC:

CWXK

Shaft Radial Play Determining Weight

4.0 ounces

MRC:

CWYF

Shaft End Play Determining Weight

8.0 ounces

MRC:

TTQY

Terminal Type And Quantity

5 wire lead

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

137640-01

Cage Code:

35351

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

09CT1247

Cage Code:

14404

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

15289

FIIG:

A07800

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Air Force

MOE:

Rule:

FXGX

PICA:

DSOR:

User:

Department of the Navy

MOE:

Rule:

N9BN

PICA:

DSOR:

User:

Poland

MOE:

Rule:

WP01

PICA:

DSOR:

User:

Spain

MOE:

Rule:

YB01

PICA:

DSOR:

User:

New Zealand

MOE:

Rule:

ZE01

PICA:

DSOR:

User:

Germany

MOE:

Rule:

ZG01

PICA:

DSOR:

User:

Republic of Korea

MOE:

Rule:

ZH01

PICA:

DSOR:

User:

Italy

MOE:

Rule:

ZR01

PICA:

DSOR:

User:

Norway

MOE:

Rule:

ZT01

PICA:

DSOR:

User:

Greece

MOE:

Rule:

ZU01

PICA:

DSOR:

User:

Turkey

MOE:

Rule:

ZW01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

ADPE 0

Represents items with no adp components

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.4000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

69F0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 31

Waterproof bag, sealed.

Preservation Material (PRES_MAT) 00

No requirement.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

9014900000

NAICS:

334511

End Use Class:

22220

SITC:

87412

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 9014900000

Parts & Accessories For Direction Finding Compasses and Other Navigational Instruments and Appliances

End Use Code 22220

Marine Engines, Parts

Standard Intl. Trade Class (SITC) 87412

Parts and Accessories Of Navigational Instruments and Appliances

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062120

NMF Description:

Generators/motors/parts Noi

UFC:

34760

LTL:

Rating variable

LCL:

WCC:

658

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 658

Electrical appliances, small.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements