NSN 5990-00-078-3182

Control Transformer Synchro

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

1 EA

NIIN:

000783182

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "SYNCHRO,CONTROL TRANSFORMER"

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

5990-00-078-3182 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAFZ

Body Material

Steel, corrosion resisting

MRC:

AAQL

Body Style

Standard round c

MRC:

AAVH

Shoulder Diameter

Between 1.5615 inches and 1.5620 inches

MRC:

AAVL

Pilot Diameter

Between 0.9370 inches and 0.9375 inches

MRC:

ABHP

Overall Length

3.0620 inches

MRC:

ABKK

Flange Diameter

Between 1.7470 inches and 1.7500 inches

MRC:

ABKU

Flange Thickness

Between 0.0900 inches and 0.0960 inches

MRC:

ABPA

Undercut Diameter

Between 1.6220 inches and 1.6280 inches

MRC:

ABPC

Undercut Width

0.0780 inches

MRC:

ABWV

Shaft Diameter

0.1870 inches single shaft and 0.1872 inches single shaft

MRC:

ABXF

Shaft Length

0.3790 inches single shaft and 0.3870 inches single shaft

MRC:

AEBZ

Schematic Diagram Designator

1 y-rotor, 1 stator

MRC:

AFJN

Fragility Factor

Moderately rugged

MRC:

AJSL

Body Size

MRC:

AJSN

Stator Input Voltage Rating In Volts

90.0

MRC:

AJSP

Stator Input Current Rating

7.0 milliamperes

MRC:

AJSQ

Stator Input Electrical Power Rating

100.0 milliwatts

MRC:

AJSS

Frequency In Hertz

400.0

MRC:

AJTJ

Zso Impedance Magnitude In Ohms

13000.00

MRC:

AJTK

Zso Impedance Angle In Deg

88.00

MRC:

AJTS

Rotor Dc Resistance In Ohms

420.00

MRC:

AJTT

Stator Dc Resistance In Ohms

675.00

MRC:

AJVF

Phase Shift Angle In Deg

3.000 input to output

MRC:

AJVG

Maximum Fundamental Null Voltage In Millivolts Per Volt

30.00 output

MRC:

AJVH

Maximum Total Null Voltage Output In Millivolts Per Volt

45.00

MRC:

AJVL

Electrical Error Angular Range In Minutes

-6.0/+6.0

MRC:

AJVM

Spline Tooth Quantity

21 single shaft

MRC:

AJVT

Actuator Friction Torque At Plus 25 Deg Celsius

0.10 inch-ounces

MRC:

AJVW

Alignment Hole Quantity

MRC:

AJWE

Shaft Radial Play Test Point

0.125 inches

MRC:

AJWG

Shaft Maximum Radial Play

0.0008 inches

MRC:

AJWH

Shaft End Play

0.0030 inches

MRC:

AJWQ

Pilot Length

0.0370 mils and 0.0430 centimeters

MRC:

AJWR

Shoulder Length

0.1290 mils and 0.1350 centimeters

MRC:

AJWX

Mounting Surface To Terminal End Distance

2.5230 inches

MRC:

AJXA

Spline Tooth Diametral Pitch

120 single shaft

MRC:

AJXB

Shaft Maximum Runout

0.0008 inches

MRC:

AJYY

Shaft Thread Series Designator

Unf single shaft

MRC:

AKAF

Shaft Thread Direction

Right-hand single shaft

MRC:

AKAN

Shaft Thread Class

2a single shaft

MRC:

CQTM

Terminal Location

Rear

MRC:

CQWQ

Shaft Thread Length

0.3550 inches single shaft

MRC:

CRSJ

Shaft Type

Spline w/threads single shaft

MRC:

CRSY

Alignment Hole Depth

0.1250 inches

MRC:

CSJY

Transformation Ratio

0.735 rotor to stator

MRC:

CTCW

Alignment Hole Bolt Circle Diameter

1.2500 inches

MRC:

CWBH

Shaft Thread Size

0.190 inches single shaft

MRC:

CWXK

Shaft Radial Play Determining Weight

16.0 ounces

MRC:

CWYF

Shaft End Play Determining Weight

16.0 ounces

MRC:

TTQY

Terminal Type And Quantity

5 screw

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

7627969P001

Cage Code:

03538

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

7627969P1

Cage Code:

03538

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

VCT18-4D1

Cage Code:

10112

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

7627969P001

Cage Code:

10651

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

15289

FIIG:

A07800

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Navy

MOE:

Rule:

N9BN

PICA:

DSOR:

User:

Brazil

MOE:

Rule:

YA01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

1.7000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

69F0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 51

Watervaporproof bag, sealed.

Cushion Material (CUSH) DA

A-a-1051, paperboard cushioning.

Preservation Material (PRES_MAT) 00

No requirement.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

9014900000

NAICS:

334511

End Use Class:

22220

SITC:

87412

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 9014900000

Parts & Accessories For Direction Finding Compasses and Other Navigational Instruments and Appliances

End Use Code 22220

Marine Engines, Parts

Standard Intl. Trade Class (SITC) 87412

Parts and Accessories Of Navigational Instruments and Appliances

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062120

NMF Description:

Generators/motors/parts Noi

UFC:

34760

LTL:

Rating variable

LCL:

WCC:

593

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements