NSN 6105-00-018-4458

Alternating Current Motor

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

N/A

UOM:

1 EA

NIIN:

000184458

Stock Availability

National stock number 6105-00-018-4458 is available in the following condition(s).

NS: 126
NE: 152
OH: 1
SV: 1

Note: Availability of this item was last checked on 05/26/2021 and may no longer be available. Submit the form below to check current price and availability.

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "MOTOR,ALTERNATING CURRENT"

A motor which is designed for operation from an alternating current source. See also motor, control.

6105-00-018-4458 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAJT

Overall Height

1.750 inches

MRC:

AAJU

Overall Length

2.700 inches

MRC:

AAJV

Overall Width

1.750 inches

MRC:

ABWV

Shaft Diameter

0.249 inches single end and 0.250 inches single end

MRC:

ABXQ

Flatted Portion Length

0.620 inches single end

MRC:

AGRB

Flat Depth

0.020 inches single end

MRC:

AKCT

Shaft Rotation Direction

Counterclockwise single end

MRC:

AKPS

Duty Cycle

Continuous

MRC:

ANPZ

Inclosure Feature

Totally enclosed

MRC:

AXCP

Winding Type

Induction-split phase

MRC:

AXGY

Mounting Method

Face

MRC:

AXHR

Mounting Facility Type And Quantity

3 threaded hole

MRC:

BFMF

Cooling Method

Nonventilated

MRC:

BKPQ

Inclosure Specificationification

Commercial

MRC:

CBBL

Features Provided

Horizontal mounting position and vertical mounting position

MRC:

CWCS

Length Of Shaft From Housing

0.688 inches single end

MRC:

CWDY

Tempurature Rating

-65.0 operating degrees celsius and 125.0 operating degrees celsius

MRC:

CWFQ

Mounting Facility Circle Diameter

1.281 inches

MRC:

CWGQ

Connection Type And Voltage Rating In Volts

200.0 line to neutral single input

MRC:

CWHZ

Shaft End Characteristic

A5 single style single end

MRC:

FAAZ

Phase

Three input

MRC:

FEAT

Special Features

Shaft end style a5, except additional flat at 90 deg, same dim.

MRC:

FREQ

Frequency In Hertz

400.0 input

MRC:

TTQY

Terminal Type And Quantity

4 solderless lug and 4 wire lead

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

2651602

Cage Code:

0AFL4

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

2651602

Cage Code:

94988

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

B6-1

Cage Code:

54395

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

00530

FIIG:

A271A0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Air Force

MOE:

Rule:

FXGG

PICA:

DSOR:

User:

Department of the Navy

MOE:

Rule:

N9BG

PICA:

DSOR:

User:

Spain

MOE:

Rule:

YB01

PICA:

DSOR:

User:

New Zealand

MOE:

Rule:

ZE01

PICA:

DSOR:

User:

France

MOE:

Rule:

ZF01

PICA:

DSOR:

User:

Germany

MOE:

Rule:

ZG01

PICA:

DSOR:

User:

Republic of Korea

MOE:

Rule:

ZH01

PICA:

DSOR:

User:

Greece

MOE:

Rule:

ZU01

PICA:

DSOR:

User:

Turkey

MOE:

Rule:

ZW01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Packaging & Dimensions MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

1.2000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

60Z0

PRES MAT:

WRAP MAT:

ICQ:

XXX

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Preservation Material (PRES_MAT) 00

No requirement.

Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

MOP: Method of Preservation. Preventive measures to protect from deterioration resulting from exposure to atmospheric conditions during storage and shipment.

CUSH: Resilient material or devices used to absorb and dissipate energy from shock and vibration to adequately protect the contents and packaging components from physical damage during handling, shipment, and storage.

PRES MAT: Preservation Material. Identifies the material used to prevent or inhibit corrosion or deterioration of an item.

THK: Thickness of cushioning. Minimum thickness of material used to cushion the item.

TOS: Type of Storage. Type of storage space and environment conditions to be maintained for an item during storage and shipment.

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062120

NMF Description:

Generators/motors/parts Noi

UFC:

34760

LTL:

Rating variable

LCL:

WCC:

593

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements