NSN 6105-00-019-0841

Control Motor

DEMIL

Shelf Life

UOM

NIIN

Demil:

DEMIL/MLI

Shelf Life:

N/A

UOM:

1 EA

NIIN:

000190841

Stock Availability

National stock number 6105-00-019-0841 is available in the following condition(s).

NS: 10
AR: 2
OH: 1
NE: 64

Note: Availability of this item was last checked on 11/22/2023 and may no longer be available. Submit the form below to check current price and availability.

Pricing & Availability

Submit this form for current pricing and availability quote on part number and/or cross reference parts.

Definition Definition of approved item name (AIN): "MOTOR,CONTROL"

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

6105-00-019-0841 Spec. NSN part characteristics

MRC

Name

Detail

MRC:

AAJT

Overall Height

5.063 inches

MRC:

AAJU

Overall Length

12.406 inches

MRC:

AAJV

Overall Width

5.001 inches

MRC:

ABSA

Spline Quantity

11 single end

MRC:

ABWV

Shaft Diameter

0.369 inches single end and 0.370 inches single end

MRC:

ACDC

Current Type

Ac input

MRC:

ANPZ

Inclosure Feature

Totally enclosed

MRC:

AXFH

Spline Length

0.6300 inches single end

MRC:

AXGY

Mounting Method

Flange

MRC:

AXHR

Mounting Facility Type And Quantity

4 unthreaded hole

MRC:

BFMF

Cooling Method

Natural convection ventilated

MRC:

BFMK

Control Field Impedance Rating In Ohms

43.0

MRC:

BFML

Control Field Winding Type

Two windings, parallel connected

MRC:

BKPQ

Inclosure Specificationification

Commercial

MRC:

BKPS

Control Field Voltage Type And Rating In Volts

115.0 ac

MRC:

CBBL

Features Provided

Vertical mounting position

MRC:

CWCS

Length Of Shaft From Housing

0.630 inches single end

MRC:

CWDY

Tempurature Rating

-55.0 operating degrees celsius and 55.0 operating degrees celsius

MRC:

CWFQ

Mounting Facility Circle Diameter

5.001 inches

MRC:

CWFX

Rotor Speed Rating In Rpm

3500.0 single no load

MRC:

CWGQ

Connection Type And Voltage Rating In Volts

115.0 line to neutral single input

MRC:

CWHZ

Shaft End Characteristic

A14 single style single end

MRC:

FAAZ

Phase

Single input

MRC:

FREQ

Frequency In Hertz

60.0 input

MRC:

TTQY

Terminal Type And Quantity

11 screw

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number

Cage

RNCC

RNVC

DAC

RNAAC

Status

MSDS

SADC

Part Number:

FPF85-61-1

Cage Code:

88818

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

C899-5-11

Cage Code:

82005

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

FPF85-61-1

Cage Code:

05088

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Part Number:

85-61-1

Cage Code:

88818

RNCC:

RNVC:

DAC:

RNAAC:

Status:

MSDS:

SADC:

Indicates a design/source control reference item

Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

19258

FIIG:

A271A0

Concept No.:

App. Key:

Cond. Code:

Status:

Part End Users MOE: Major organizational entities

Name

MOE Code

MOE Rule

PICA

DSOR

User:

Department of the Air Force

MOE:

Rule:

FXGG

PICA:

DSOR:

User:

Department of the Navy

MOE:

Rule:

N9BG

PICA:

DSOR:

User:

U.s. Coast Guard

MOE:

Rule:

C911

PICA:

DSOR:

User:

Brazil

MOE:

Rule:

YA01

PICA:

DSOR:

User:

Spain

MOE:

Rule:

YB01

PICA:

DSOR:

User:

Canada

MOE:

Rule:

ZC01

PICA:

DSOR:

User:

Republic of Korea

MOE:

Rule:

ZH01

PICA:

DSOR:

User:

Portugal

MOE:

Rule:

ZP01

PICA:

DSOR:

User:

Greece

MOE:

Rule:

ZU01

PICA:

DSOR:

User:

Turkey

MOE:

Rule:

ZW01

PICA:

DSOR:

Material & Special Handling Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC

PMIC

ESD

ENAC

ADPE

CRITL

HMIC:

PMIC:

ESD:

ADPE:

CRITL:

Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) A

Item does not contain precious metal.

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Identification Codes

HMIC: Hazardous Material Indicator Code. Identifies a hazardous item.

PMIC: Precious Metal Indicator Code. Identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Import / Export Schedule B Classification

Schedule B

NAIC

End Use

SITC

USDA

HITECH

Schedule B:

8412809000

NAICS:

333618

End Use Class:

21100

SITC:

71893

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 8412809000

Engines and Motors, Nesoi

End Use Code 21100

Industrial Engines

Standard Intl. Trade Class (SITC) 71893

Power Generating Engines and Motors, N.e.s.

Freight Universal and National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

062120

NMF Description:

Generators/motors/parts Noi

UFC:

34760

LTL:

Rating variable

LCL:

WCC:

593

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Freight Codes

NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.

SITC: Standard International Trade Classification.

NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.

UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.

LTL: Less than a truckload rating.

LCL: Less than a carload rating.

WCC: Water commodity code. A three position code that indicates all shipments via water.

TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.

SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit

ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft

ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements