No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-01-092-1394
NSN 5935-00-288-5973
NSN 5895-01-158-0469
NSN 6240-01-611-1076
NSN 5835-01-386-4027
NSN 4140-01-460-2390
NSN 5985-01-248-3054
NSN 5910-01-223-4793
NSN 6145-00-840-3348
NSN 5835-01-068-4043
NSN 5996-00-987-0934
NSN 6105-01-364-7483