Has 2 holes 0.344 in. Diameter 1.312 in. From edge along length and 1.000 in. From center of hole to edge along width; 2 holes 0.375 in. Diameter 2.312 in. C to c distance between holes center of 1st hole to edge left side 9.281 in. Also 1.000 in. From center of hole to-edge along width
No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
NSN 5960-01-464-9605
NSN 5905-01-284-0088
NSN 5990-01-380-7815
NSN 5960-01-134-4099
NSN 6240-00-779-3394
NSN 6105-00-004-6941
NSN 5960-00-924-5255
NSN 6105-01-171-3103
NSN 5930-00-890-9899
NSN 6150-00-250-5166
NSN 5998-01-429-8097
NSN 5975-01-525-6749