No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5950-01-313-0837
NSN 6150-00-398-0086
NSN 6145-00-226-4468
NSN 5930-01-254-2616
NSN 5895-01-534-1901
NSN 6650-01-376-6965
NSN 6685-00-102-1384
NSN 5925-00-552-2649
NSN 4140-01-348-9029
NSN 6145-00-814-2098
NSN 5855-01-358-1939
NSN 5960-00-254-4271