No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5990-00-110-1153
NSN 5990-01-633-9503
NSN 5999-00-977-9952
NSN 6110-01-547-7700
NSN 6650-01-514-0240
NSN 5925-00-990-8818
NSN 7035-01-214-5171
NSN 6130-01-094-4670
NSN 6650-01-237-4689
NSN 5905-00-873-3322
NSN 5945-01-529-7321
NSN 5985-01-607-4509