No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 7035-01-629-2277
NSN 5996-00-220-9414
NSN 6645-01-411-2283
NSN 5935-00-270-1271
NSN 5910-00-788-2243
NSN 5960-01-614-8005
NSN 5925-00-389-6433
NSN 6110-01-058-5321
NSN 6620-01-044-3371
NSN 5950-01-454-4169
NSN 5910-00-701-7054
NSN 6130-00-483-1857