Product Features
2 holder, lathe tool, cutting off, straight 3/8 by 7/8 in.Shank, f/3/32 by 5/8 in.Blade, turning, offset, lh, 3/8 by 7/8 in.Shank, f/1/4 by 1/4 in.Bit; 2 indic., thread dial; 2 knurling tool, revolving head, 3/8 by 7/8 by 5-1/2 in.Shank, w/3 pr knurls diamond shape, fine, med., coarse 2 post, tool, to accommodate 3/8 by 7/8 in.Shank; 2 rest, cpd.Grad., follower, steady; 2 sleeve, lathe, h/stock spindle; 2 stop, carriage, micrometer, thread cutting, adjustable; 2 switch, 208v, 3 pos.Start, stop, rev.; 2 taper attachment, telescopic, lathe
Product Technical Spec.
Center To Center Distance:
33.750 inches
Performance Type:
Standard duty
Purpose For Which Designed:
General
Accessory Components And Quantity:
2 belt, flat, v-dr.; 1 bench-lathe; 1bit, lathe tool holder, high speed steel, boring, 3/16by3/16in.Turning 1/4by1/4in.; 2 blade lathe tool holder, cut off, high speed steel, 3/32by5/8 in.; 2 ctr., lathe, pipe, 1/2by 3 in.; 2 ctr., lathe, 60 deg.No.2 morse taper; 2 chuck, drill, 3 jaw, 0 to 1/2 in.; 2 chuck, lathe, fitted, ind., 4 jaw, rev., 8 in., univ., 3 jaw, w/2 sets jaws, 1 set internal, 1 set ext., 6 in.; 2 collet, split, f/round work, 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 1 in.; 2 collet attachment, h/wheel type, 1/16 to 1 in.; 2 cutting attachment, milling and keyway; 2 lathe, bent tail, single screw, single, 3/8, 3/4, 1-1/4, 1-1/2, 2-1/2 in.; 2 face plate, 5-5/8, 8-3/8 in.; 2 set gears, metric transposing, eng.Grad.; 2 holder, lathe tool, turning, straight, 3/8 by 7/8 in.Shank for 1/4 by 1/4 in.Bit, boring, 3/8 by 7/8 in.Shank, comp.W/9/16 in.Bar and 30, 45, 90 deg.End caps for 3/16 in.Bits, cutting off, rh, 3/8 by 7/8 in.Shank, f/3/32 by 5/8 in.Blade
Electric Motor Horsepower Rating:
0.75
Electric Motor Quantity:
1
Spindle Speed Quantity:
12
Spindle Speed Range In Rpm:
+55.0/+1400.0
Spindle Speed Range In Rpm:
+55.0 to 1400.0
Rated Swing:
10.000 inches
Actual Swing Over Bed:
10.125 inches
Swing Over Cross Slide:
5.750 inches
Thread Change Quantity:
48
Headstock Drive Type:
Step cone pulley, back geared
Headstock Center Taper Size Designator:
2 asa standard
Hole Diameter Through Spindle:
1.375 inches
Carriage Longitudinal Feed Operation Method:
Hand and power
Carriage Cross Feed Operation Method:
Hand and power
Thread Quantity Range:
+4.0/+80.0 per inch
Thread Quantity Range:
+4.0 to 80.0 per inch
Voltage In Volts:
220.0 and 440.0
Item Name:
Lathe,conehead Toolroom
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
Part Materials
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
Freight Classification
NMFC
UFC
LTL
LCL
WCC
TCC
SHC
ACC
Dept. of the Army 
Dept. of the Navy 
Defense Logistics Agency 
Turkey