No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-01-103-0398
NSN 6650-01-506-5636
NSN 6610-01-297-1492
NSN 5895-01-319-9151
NSN 6620-00-361-3590
NSN 6145-00-044-3584
NSN 5915-01-506-6970
NSN 5996-01-143-5779
NSN 6620-01-412-0938
NSN 6110-01-408-7821
NSN 6150-00-410-8920
NSN 5960-01-025-2526