No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-00-353-5730
NSN 5998-01-423-8525
NSN 6645-01-305-4068
NSN 5930-01-516-5735
NSN 5945-01-422-0381
NSN 5985-01-165-9424
NSN 5835-01-140-9306
NSN 5960-01-593-4760
NSN 5935-01-357-1121
NSN 5965-01-357-8259
NSN 6135-00-377-9165
NSN 5950-00-189-0551