No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5925-01-317-2483
NSN 6130-00-153-1338
NSN 6650-01-369-6536
NSN 5930-01-562-6764
NSN 6620-01-633-8443
NSN 6620-01-219-5722
NSN 6145-01-293-8628
NSN 6110-00-618-4171
NSN 5965-01-210-7784
NSN 6150-01-494-3342
NSN 6150-00-068-8493
NSN 6110-00-191-9225