Ends chamfered 45.0 degrees at 0.015 in. D
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6645-01-657-2604
NSN 7035-01-459-9598
NSN 6130-01-106-3085
NSN 5920-01-647-0812
NSN 5910-01-361-2110
NSN 6150-00-092-9134
NSN 6150-01-173-3957
NSN 5999-00-165-0403
NSN 5985-01-659-4133
NSN 5950-01-065-2288
NSN 5975-00-343-9466
NSN 4140-00-385-2925