Chamfered ends 45.0 degrees at 0.015 in. D
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5915-01-485-9434
NSN 6240-01-578-7023
NSN 5835-01-359-2575
NSN 6685-01-312-6352
NSN 5915-00-243-2030
NSN 6105-00-855-6514
NSN 5950-01-137-8120
NSN 5996-00-690-0705
NSN 5975-01-212-3870
NSN 5925-00-205-2767
NSN 6650-00-905-9317
NSN 6145-00-097-9437