Washer an960 c4l, used in hardware kit for 2-stud socket relay
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5930-01-246-4331
NSN 6650-01-172-2226
NSN 6620-00-496-8697
NSN 4140-01-349-6885
NSN 5998-00-963-6950
NSN 5855-00-149-0766
NSN 5855-00-560-0110
NSN 6645-01-257-8840
NSN 5920-01-211-5557
NSN 6150-00-189-0292
NSN 6650-00-569-1762
NSN 5910-00-114-0715