No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-117-8557
NSN 5990-00-831-4421
NSN 6645-00-327-4005
NSN 5925-00-246-4645
NSN 6650-01-543-3349
NSN 5920-00-438-4973
NSN 6145-01-391-6199
NSN 6105-01-301-7159
NSN 5965-01-317-5020
NSN 6110-01-413-1514
NSN 5985-01-326-6580
NSN 5920-01-051-0090