No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6610-01-476-7412
NSN 6220-00-016-9441
NSN 5915-00-115-5407
NSN 5920-00-486-0482
NSN 4140-01-539-5410
NSN 6105-00-224-2452
NSN 6685-00-802-9294
NSN 5998-01-630-5754
NSN 6135-00-809-2148
NSN 5835-00-821-8555
NSN 4140-01-290-3608
NSN 6145-01-026-0030