Contains 4 bolt holes drilled 0.282in max & 0.276in min
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5999-00-816-9670
NSN 5996-01-004-2579
NSN 5965-00-504-6494
NSN 6685-01-622-2060
NSN 4140-00-240-1848
NSN 6110-01-479-8991
NSN 5930-00-232-2836
NSN 6610-01-143-7914
NSN 5920-00-081-5958
NSN 5895-01-539-4908
NSN 5895-00-661-1773
NSN 6220-01-608-3965