A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5925-00-763-7687
NSN 5935-01-634-0668
NSN 6650-01-649-0228
NSN 6135-01-633-2066
NSN 5905-00-187-0210
NSN 5905-00-884-4779
NSN 6150-01-628-8685
NSN 5920-01-168-7810
NSN 5925-00-875-1296
NSN 5835-01-619-6268
NSN 5915-00-189-1323
NSN 6610-00-556-1870